EMC Celerra Configuration Manual

EMC Celerra Last Modified: Thursday, May 11, 2017 Event Source Product Information: Vendor: EMC Event Source: Celerra Versions: 7.0, 7.1 RSA Product Information: Supported On: NetWitness Suite 10.0 and later Event Source Log Parser: celerra Collection Method: SNMP Event Source Class.Subclas ...

Perform the following tasks to configure EMC Celerra to work with RSA NetWitness Suite: l Configure EMC Celerra to send SNMP traps. l Configure EMC Celerra as an SNMP event source on RSA NetWitness Suite: i. Add the SNMP Event Source Type ii. Configure SNMP Users Configure EMC Celerra to Send SNMP Traps You have to configure your EM ...

Add the SNMP Event Source Type: 1. In the RSA NetWitness Suite menu, select Administration > Services. 2. In the Services grid, select a Log Collector service. 3. Click under Actions and select View > Config. 4. In the Log Collector Event Sources tab, select SNMP/Config from the drop-down menu. The Sources panel is d ...

9. Update any of the parameters that you need to change. (Optional) Configure SNMP Users If you are using SNMPv3, follow this procedure to update and maintain the SNMP v3 users. Configure SNMP v3 Users 1. In the RSA NetWitness Suite menu, select Administration > Services. 2. In the Services grid, select a Log Collector ...

6. Fill in the dialog with the necessary parameters. The available parameters are described below.. SNMP User Parameters The following table describes the parameters that you need to enter when you create an SNMP v3 user. Parameter Description Username * User name (or more accurately in SNMP terminology, security name). ...

Parameter Description l MD5 - Message Digest Algorithm Authentication Passphrase Optional if you do not have the Authentication Type set. Authentication passphrase. Privacy Type (Optional) Privacy protocol. You can only set this parameter if Authentication Type parameter is set. Valid values are as follows: l None (de ...