Fenix TK35 Operation & User’s Manual
Text of the manual
Fenix TK35 2018 Flashlight
Technical Parameters
ANSI/PLATO
FL1
General Mode
Flash Mode
Turbo
High
Med
Low
Eco
Strobe
SOS
Output
1300
Lumens
500
Lumens
150
Lumens
50
Lumens
10
Lumens
1300
Lumens
50
Lumens
Runtime
3h
10min
5h 45min
21h
30min
68h
15min
235h
/
/
Distance
480m
294m
161m
97m
39m
/
/
Intensity
57,600c
d
21,600cd
6,480cd
2,360cd
380cd
/
/
Impact
Re
Cree XHP35 HI neutral white LED, with lifespan of 50,000 hours
Powered by two 18650 rechargeable Li-ion batteries
159.5mm Length x 48mm Head diameter x 43mm Body diameter
271 grams/9.6oz (excluding batteries)
Max 1300 Lumens and 480m beam distance
Micro USB rechargeable battery holder
Battery level indication and low-voltage warni
In Flash mode, press and hold the Functional switch for 1 second to the last used output in
General mode.
Output Selection
In General mode, single click the Functional switch to cycle through
Eco→Low→Med→High→Turbo.
In Flash mode, single click the Functional switch to cycle through Strobe→SOS.
Instant Strobe
With the light switched off, p
Note: This only works on 18650 Li-ion battery.
Charging
The battery holder features charging function with a standard Micro USB port.
1. Take the battery holder out of the light, plug the USB port of the charging cable into any USB
power supply. and plug the Micro USB side of the charging cable into the charging port of the
battery holder.
2. The charging in
◎ If the flashlight will not be used for an extended period, remove the battery, or the flashlight
could be damaged by electrolyte leakage or battery explosion.
◎ Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with
an approved spare.
◎ Periodic cleaning of the battery contacts improves the flashlight's perfor