FLIR LS-Series Quick Start Manual
Text of the manual
431-LS00-00-QS Rev 120
Nov 2014
LS-Series Quick Start Guide
Power Button – The LS-Series camera has three power states:
On, Off, and Auto Shutdown.
• On – Takes approximately 4 seconds (during bootup the FLIR
splash screen is shown on the eyepiece display).
• Off – Push the power button to turn the camera off.
• Auto Shutdown - If no buttons are
431-LS00-00-QS Rev 120
Nov 2014
Charging the Camera – The battery in the camera should be fully
charged prior to use. The initial charge time is approximately 4 hours.
The cameras should be turned OFF throughout the charging cycle.
Caution!
To charge the camera, lift the
cover from the USB port, plug in
the USB cable provided with the
camera, and also plug