Linksys WUSB6300 Manual 

Text of the manual

Wireless Network Configuration

Wi-Fi Protected Setup 3 Wireless network configuration utility 3 Operating system’s built-in wireless network setup 3 Troubleshooting WUSB6300 10 Specifications Linksys WUSB6300 11

Thank you for choosing the Linksys dual-band wireless USB AC1200 adapter.

Using the latest wireless networking technology, the adapter adds or upgrades wireless connectivity on your Windows-based desktop or laptop computer. To help protect your data and privacy, you can configure your home network and this adapter to use W

This chapter describes the procedure for installing the adapter.

Installation To install the adapter: 1. Insert the CD into your CD or DVD drive. 2. For Windows 8, click Tap to choose what happens to this disc in the upper-right corner of the screen. 3. Click Set up your Linksys Adapter. If you do not see a pop-up menu for the

Wi-Fi Protected Setup

Linksys WUSB6300 To configure the adapter’s wireless connection settings, you can use: • Wi-Fi Protected Setup™ (if your router, gateway, or access point supports it) • Your computer’s wireless network configuration utility • Your operating system’s built-in wireless network setup Wi-Fi Protected Setup To connect usi

Operating system’s built-in wireless network setup

Linksys WUSB6300 New Wireless Connection To connect to a different wireless network: 1. Move your mouse pointer to the lower-right corner of the screen, then click Settings. 2. Click the wireless network icon . The Network menu opens, showing you available wireless networks and your current connection st

Operating system’s built-in wireless network setup

Linksys WUSB6300 3. Enter the Wi-Fi Protected Access (WPA/WPA2) passphrase or the Wired Equivalent Privacy (WEP) key (depending on your type of security), then click OK. This screen appears while the adapter connects to your network. Do not cancel, unless you want to end the connection. Your computer is

Operating system’s built-in wireless network setup

Linksys WUSB6300 3. Select your network, then click Connect. 4. If your network uses wireless security, go to Step 5. If your network does not use wireless security, this screen appears. Click Connect Anyway and go to Step 6. 5. Enter the Wi-Fi Protected Access (WPA/WPA2) passphrase or the Wired Equival

Operating system’s built-in wireless network setup

Linksys WUSB6300 This screen appears when you are connected to your network. 6. If you want to save your settings, select Save this network. 7. Click Close. The Set Network Location screen may appear. This screen helps apply the correct settings for your type of location. a. Click Home, Work, or Public l

Other Adapter Manuals