Linksys EA6350 V2 Operation & User’s Manual
Read Online
Read the Linksys EA6350 V2 Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
or pulses slowly during bootup, during firmware upgrades, and during a Wi-Fi Protected Setup connection. Flashes quickly when there is a Wi-Fi Protected Setup error. ...
powering it on. Twist the antenna connector clockwise onto the port on the router. NOTE For best performance, position the side antennas at a 30˚ angle as shown in the picture on the left. Wi-Fi Protected Setup™ button— Press to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices. USB port—Connec ...
Where to find more help Linksys.com/support (documentation, downloads, FAQs, technical support, live chat, forums) Linksys Smart Wi-Fi help (connect to Linksys Smart Wi-Fi, then click Help at the top of the screen) How to install your router To install your router: If replacing an existing router, disconnect it. Power on your new router. Connect the Internet cable from your modem to the yellow Internet port on your router. ...
easily manage your router’s settings, such as: Change your router’s name and password Set up guest access Configure parental controls Connect devices to your network Test your Internet connection speed NOTE: As part of Linksys Smart Wi-Fi account setup, you will be sent a verification e-mail. Make sure that you open the e-mail f ...
network and your guest network, disconnect the devices, or display information about each device. Guest Access lets you configure a network so guests can access the Internet, but not all of your network resources. Parental Controls let you block web sites and set Internet access times. Media Prioritization lets you set which devices and ...
USB Storage lets you access an attached USB drive (not included) and set up file sharing, a media server, and FTP access. (Available only on routers with USB ports.) Connectivity lets you configure basic and advanced network settings. ...
Wireless lets you configure your router’s wireless network. You can change the security mode, password, MAC filtering, and connect devices using Wi-Fi Protected Setup™. Security lets you configure your router’s wireless security. You can set up the firewall, VPN settings, and make custom settings for applications and games. ...
customer support at linksys.com/support. Your router was not successfully set up If Linksys Smart Wi-Fi did not complete the setup, you can try the following: Press and hold the Reset button on your router with a paperclip or pin until the LED starts flashing (about 10 seconds), then install the router again. Your r ...
If you get a “Your Internet cable is not plugged in” message when trying to set up your router, follow these troubleshooting steps. To fix the problem: Make sure that an Ethernet or Internet cable (or a cable like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem. This port on the modem is usually labeled ...
Click your own network name, and click Connect. In the example below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys E-Series network, BronzeEagle in this example, is shown selected. If you are prompted to enter a network key, type your password (Security Key) into the Network key and Confirm network key fields, then click Connect ...
Description Dual-Band AC Router with Gigabit and 1×USB Model Number EA6350 V2 Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet) Radio Frequency 2.4 and 5 GHz # of Antennas 2 external adjustable antennas Ports Power, USB (1), Internet, Ethernet (1-4), R-SMA antenna (2) Buttons Reset, Wi-Fi Protected Setup, power LEDs Top panel: Power Back panel: Internet, Ethernet (1-4) UPnP Supported Securit ...
(256 x 40 x 184 mm) Unit Weight 17.67 oz (501 g) Power 12V, 2A Certifications FCC, IC, CE, Wi-Fi a/b/g/n/draft ac, Windows 7, Windows 8, DLNA Operating Temp. 32 to 104°F (0 to 40°C) Storage Temp. -4 to 140°F (-20 to 60°C) Operating Humidity 10 to 80% relative humidity, non-condensing Storage Humidity 5 to 90% non-condensing NOTES For regulatory, warranty, and safety information, see the CD that came ...
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause ha ...
the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions su ...
