insize ISV-E10 Operation Manuals

1.2 The waterproof probe of lens is IP65, negative pressure, and put the probe to a dusty box, open the box and without any dust is OK; Spray water to the probe form any direction, and have no effect on the probe, and the water flow is 12.5l/min, the test time should be within 3min. Attention Structure 1.3 The lens and cable are not covered by warranty. They may be damaged due to improper operation and can not be repaired. a b -lens -adjustable LED illumination c -handle c a b 1.4 The cable can be bent but can’t be set at a fixed shape.

L -DC in 5V M -3.5" LCD N -reset On/Off ESC OK -power on/off -take photo -take video -up -down -menu -return H -LED brightness adjustment I -SD card J -TV port A M B F E D I J H k L H G C Reset N 9 Lens 5.5mm 0.3M 640×480 30fps IP65 File format Weight PAL / NTSC 3.7V rechargeable battery (for 3 hours working) 2G SD card(about 6000 pictures or 15 minutes video) 450g Lens 2G SD card AC/DC adaptor video output cable USB cable Clean bar Main unit 45° 1 p c 1 p c 1 p c 1 p c 1 p c 1 p c 1 p c 2pcs 5.1 Display nothing after power on: low battery, please charge the battery, if can not charge, please replace th lithium battery. 5.2 Only display words but not picture, please check if the lens cable connecting well. 5.3 Can not take photos or videos: please check if SD card is inserted. And if SD card broken or full of files, please replace SD card or remove the files to save new pictures or videos. 5.4 Can not operate on the main unit: when meeting this problem, just turn off the main unit and press the “ Reset ” button 1-2 seconds, then turn on the main unit again. Common problems Specification Diameter Pixel Resolution Frame rate Dust/waterproof probe Standard delivery Power supply Memory

workpiece. This product is supplied with a rigid 1m long and 5.5mm diameter cable, and if need to change to other types of connection cables, please loosen the nut anticlockwise and remove the cable (see below picture). 2.2Press the “on/off” 3-5 seconds to turn on, and the screen display about 5 seconds. will 2.3Move the lens to the viewing workpiece and adjust the distance between 15-100mm (focus distance), and the rate would be larger if the distance is much smaller during this range, and the biggest magnification is about 28X. Adjust the LED brightness to make the view more clearly. remove the cable mount the cable locating slot Operation When mounting slot (see below picture), then tighten the nut. the cable, take attention of the place of the locating 8 LANGUAGE ENGLISH 繁體中文 简体中文 Japanese Deutsch 4.4 Delete all Select “delete all”, press “up” or “down” to choose “YES” or “NO”, then press “OK” to confirm delete all or not. 4.5 Auto power off Select “Auto power off”, select 5 power off automatically after the minutes selected. And if choose “Disable”, it would never power off. 、 10、 15、 30 minutes to DISABLE 5MIN 10 15MIN 30MIN MIN Auto off 4.6 Mirror mode Select “Mirror mode”, the picture would mirror horizontally. original picture YES NO Video output Video format Date/Time setup language Delete all Auto power off Mirror mode Video output Video format Date/Time setup language Delete all Auto power off Mirror mode ERASE ALL Video output Video format Date/Time setup language Delete all Auto power off Mirror mode after mirror

input voltage is 110-220V. The “ ” in the right corner would blink when charging (see below picture). When display “ ” and the battery do not change means the battery is full charged (see below picture). Charge： blink 2.4 The angle of side view is 54°, and to observe internal wall of holes, install a 45° mirror is necessary, and 30° and 60° mirror is also available for other views. Attention: It is common the lens burning hot when LED light up for a long time. The lens can also put into water or oil, and the waterproof probe is IP65. focus distance: 15~100mm angle of view: 54° If display low battery in the right corner, please charge or replace the lithium battery. full charged Install method of the mirror： a. Loosen and remove the lens protecting cover b. Mount the mirror to the end as it possible, then aim the mirror to the to the observation side. 7 Press “OK” under observational mode to enter menu. Video output Video format Date/Time setup language Delete all Auto power off Mirror mode Video output Video format Date/Time setup language Delete all Auto power off Mirror mode 4.1 Video format BRIGHTNESS 140 CONTRAST 140 HUE 0 SATURATION 70 DEFAULT 4.2 Date/Time setup 4.3 Language Select language available: English、 traditional Chinese、 simplified Chinese,Japanese、German. PAL TV OUTPUT NTSC Setup TV format: NTSC/PAL, select one format then set the value of BRIGHTNESS、CONTRAST、HUE、SATURATION. When select “DEFAULT” to reset options to default. Press “up” or “down” to select one then press “OK”, setup value by pressing “up” or “down”, and just press “OK” when finish selecting. 。 Menu Video output Video format Date/Time setup language Delete all Auto power off Mirror mode FACTORY SETUP Select “Date/Time setup”, press “up” and “down” to choose Year/Month/Date/Hour/Minute/Second, press “take photo”to increase the value, press “take video” to reduce the value. 2000/01/10 10:22:22 Video output Video format Date/Time setup language Delete all Auto power off Mirror mode 15 ~ 100mm 54°

carefully and the electrode on the battery “ ”need to keep pace with the electrode on the main unit. 5 6 Replace the lithium battery: 2.5Press “take photo” button to take photos and press video” button once to start to take videos and press it again to finish taking videos. “take 2.8 Connect the main unit to the computer with USB cable to copy the pictures or videos. Or take off the 2G SD card (press the SD card, it will automatically pop up for you), so you can also copy the pictures or videos with a card reader. Please take attention of the direction of the SD card when mounting, and the file format of picture is JPG, ASF for videos. ESC OK PUSH computer ESC OK PUSH attention: SD direction for mounting 2.9 It will affect the observation when the lens get dusty after long used. Just clean the lens or reflector carefully with a clean bar dipping a small mount of alcohol. 3.1 Three operation modes: Overlook mode: overlook all pictures or videos in SD card Menu mode: set all function 3.2 Functions of buttons under different operation modes: Buttons OK ESC Observational mode enter menu mode enter overlook mode take photo take or stop video Overlook mode Menu mode select up and down delete pictures or videos confirm selecting enter observational mode return previous mode enter observational mode start or stop reading videos return previous mode Display technology maintenance information White button + - T ESC OK + - 2.7Connect the main unit to TV with TV cable, and the picture will display on the TV directly (Attention: the file format need to change to “ PAL/NSTC ” in correspondence with TV), and the picture would display on the main unit when take off form TV. 2.6Press “ESC”button, the screen will display the latest photo or video, then press “ up ” and “ down ” to overlook all the photos or videos in the SD card. Press the white button, remove the battery cup and take out the used battery. ESC OK PUSH Function Observational mode: display current view select pictures