Grandview CB-UY60 Installation Manual

Model-Y Screen Portable Series X-Press Thanks for purchasing a Liberty Grandview screen

1 1 2 3 4 7 5 6 8 12 10 13 14 15 16 17 18 9 11 1 2 3 4 6 5 7 8 6 Description Illustration Part name Fabric Fabric black border Semicircle tube Rod Tube lock Handle Handle Base Casing Foot Foot Wheel Front Base Upper Support Lever Lower Support Lever Support Lever Joint Support Lever Pipe Seat Seat Rear Base Front view Back view Side view Top view Screen retraction The surface of screen is processed to achieve good performance of the reflector. Any damage of surface will influence projection effects so please use this product in right way. Caution Please do not shake the screen by hand. Please do not make any marks on screen surface. Prohibited Prohibited Prohibited Prohibited Please do not use any cloth with water, volatile oil and corrosive cleaning agents to clean the screen, because they will make the surface metamorphism and paint off. Please do not pull the screen strongly that it will cause the risk of damage. Any stains on the casing, please use dry-cloth to clean softly. If too serious, please use soft-cloth with water-diluted neutral detergent to clean. Neutral Detergent Please use a brush to clean the dust of screen surface softly. Please keep the screen far away from sunshine,dust and wet. Avoid using the screen in strong wind. Tips The surface of screen is dried before shipment; if have any strong smell, please open the windows. Note 16 12 15 14 13 18 17 11 10 9 Maintenance Location Caution Please contact your local dealer for repairing and replacing. Please contact us if you have any questions. Avoid taking apart the fixture yourself. Prohibited Taking Apart Caution

16:9 CB-UY60 CB-UY70 60 " 70 " CB-UY80 CB-UY92 80 " 92 " 1328 747 1488 1774 1550 871 1710 1799 1771 996 1930 1990 2030 1145 2192 2234 CB-UY65 CB-UY85 65 " 85 " 1400 914 1488 1870 1831 1219 1930 2136 16:10 CB-UY60 2526 35 35 35 35 35 35 27 32 0 0 Specifications W (mm) L (mm) H (mm) A (mm) B1 (mm) Net weight (kg) Format Model Specification (In) Viewing area Screen dimension Note: Sizes and specifications are subject to change at any time. Refer to real product for exact data. The tolerance for L is ± 5mm. Measurement unit: mm Front view Top view Side view 2. Pull up the handle while using the thumb to release the tube lock as arrow indicates . ( Figure 3 ) 1. Put the screen on the ground, in a proper position facing the projector. Turn the feet out until they are perpendicular to the screen casing . ( Figure 1 - 2 ) Figure 1 Figure 2 Figure 3 Open Screen 320 A Figure 4 3. Opening the screen, if the support bar can not be expanded completely, please use screwdriver to adjust the screws until support bar can be expanded completely. Adjusting cross-screws L B1 W H B1 B3 25 Figure 5 4. The support bars will have some connecting separations after used in many time. Please follow the pictures to reconnect. 6.25kg 6.85kg 7.83kg 9.75kg 6.34kg 6.96kg 7.57kg 8.89kg 6.63kg 7.91kg

4 3 收 合 银 幕 Open Screen 5. Pull up the screen with constant speed and stop at desired position for three minutes so that the screen can be installed . ( Figure 6 - 9 ) 6. Adjust the foot wheel when the ground is not even. To be exact, clockwise rotation raises the foot while counterclockwise rotation lowers the foot, with limits of five circles or within 8mm . ( Figure 10 - 11 ) Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 foot wheel Foot Raise Lower foot wheel 3. Rotate the feet in line with the casing. Retraction is completed . ( Figure 16 - 18 ) Figure 12 Figure 13 Figure 15 Figure 16 Figure 17 Figure 18 Retract screen 1. Put the screen back to casing after using. 2. Hold the handle and press it down slowly (figure 12). According to figure 13, Please stay the support levers into the seats for locking easily(figure 14). When you can hear “pa”, it means that the screen is locked (figure 15). Press gently Handle base Figure 14 Handle base Front base Foot Casing Support Lever Joint Seat