LiteOn ADC-V622 Installation Manual

Pre-installation checklist • ADC-V622 camera (included) • AC power adapter (included, required for non-PoE connections) • Broadband (Cable, DSL, or Fiber Optic) Internet connection • A computer, tablet, or smartphone with Wi-Fi is required if the router does not have the Wi-Fi Protected Setup (WPS) feat ...

1. Connect the camera’s AC power adapter and plug it into a non-switched outlet. 2. Press the Menu button and use the Volume buttons to scroll to the WPS menu option (follow the audio prompts or look for a flashing blue LED). 3. P ...

entering the following URL: www.alarm.com/addcamera 4. Select the camera from the video device list or type in its MAC address to begin adding the camera. The camera’s MAC address is located on the back of the camera near the power cable. 5. Follow ...

Menu button and use the Volume buttons to scroll to Bluetooth mode. Factory Reset Caution: This will restore factory- default settings to the camera. If already installed, the camera may need to be removed from the Alarm.com account and re-added after a factory reset. To perfor ...