JB Systems COB-4BAR Operation Manual

safety, please read these operating instructions very carefully before you start using this unit. FEATURES This unit is radio-interference suppressed. This product meets the requirements ...

 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.  To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when b ...

 Please use the original packing when the device is to be transported.  Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Important: Never look directly into the light source! Don’t use the e ...

DMX-dongle. With this dongle you can control the projector via wireless DMX. OVERHEAD RIGGING  Important: The installation must be carried out by qualified service personal only. Improper installation can result i ...

 Connect several units together using good quality balanced microphone cables. The unit that has no cable connected to its DMX-input is the “master”, the others are the slave units.  Make sure that all units are connected to the mains.  ...

Used to set the unit in slave mode when you want to have synchronized effects with the master unit. (when the first unit is running it’s automatic programs or is set in a fixed color) Used when you want to control the bar with the optional foot controller  Press the MODE button ...

= slow, 99 = maximum speed)  Press the ENTER button to confirm  Flash starts blinking on the display: Use the DOWN and UP buttons to set the desired speed for the stroboscopic effect (00 = off, 99 = m ...

not set to zero or to a too low level ! IR ACTIVE Activate this function If you want to control the 4BAR with the small wireless remote control. Always deactivate this function when you don’t want to use the wireles ...