Ubiquiti unifi switch 8 Quick Start Manual

PoE-Powered Gigabit Switch with PoE Passthrough. This Quick Start Guide is designed to guide you through the installation and also includes the warranty terms. Package Contents UniFi Switch Mounting Screws (Qty. 2) Screw Anchors (Qty. 2) 8-Port PoE-Powered Gigabit Switch with PoE Pa ...

• A DHCP-enabled network for the UniFi Switch to obtain an IP address (connected devices will also obtain IP addresses after deployment) • A UniFi Cloud Key or management station running the UniFi Controller software v5.3 (or newer), located either on-site and connected to the same Layer 2 network, or off-site in a cloud o ...

connections. PoE In (Port 1) Supports 802.3af/at or 48V Passive PoE to power the switch and can provide 48V (2-pair) PoE passthrough to port 8. PoE Out (Port 8) PoE output is Off by default. Enabling PoE output requires 24W input power vi ...

protection. DC In To power the switch by DC input, connect a 48V power adapter to the 48VDC port. Reset Button This button serves two functions for the UniFi Switch: • Restart Press and release the Reset button quickly. • Restore to Factory Default Set ...

Alternating White/Blue Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place. Steady Blue Successfully integrated into a network and working properly. Flashing Blue This ...

Link/ Speed/ Activity Off No Link Amber Link Established at 10/100 Mbps Flashing Indicates Activity Green Link Established at 1 Gbps Flashing Indicates Activity ...

MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF CLEARANCE NEXT TO THE VENTILATION HOLES FOR ADEQUATE AIRFLOW. WARNING: The US-8 must not be stacked. Do not place it on top of another switch. Do not place anything on top of the US-8. ...

placed on a desktop. Follow the Wall Mounting instructions to mount the switch using the included screws and anchors. WARNING: To reduce the risk of fire or electric shock, do not expose the switch to rain or moisture. Wall Mounting 1. Drill two 6 mm holes set 73.5 mm apart. 73.5 ...

the mounting slots on the bottom of the switch. Then slide the switch down to lock it in place. ...