REMS CamSys Instruction Manual

Text of the manual

1800 4 ANCRA www.ancraaustralia.com

REMS CamSys INSTRUCTION MANUAL ELECTRONIC CAMERA INSPECTION SYSTEM CAMSYS

duktes an den

sendung der s Kaufdatums r Garantiezeit oder Material- ie Mängelbe- noch erneuert. andlung oder Betriebsmittel, e oder fremde urückzuführen rags-Kunden- erkannt, wenn r autorisierten tzte Produkte e Gewährleis- n durch diese Neuprodukte, hweiz gekauft reinkommens n Warenkauf ervice. ad des Abhol- eng Translation of the Original Instruction

r their safety.

the appliance. hen operating der the influ- hile operating uipment such ction used for sition before or plugging in wer tool on. A may result in . This enables ep your hair, wellery or long nd collection these devices ces may only ssary for their r application. r which it was off. Any power st be repair

y 3.7 V, 2.5 Ah

0 Hz, input / tput +40°C t battery before charger/mains cket. Charging ending on the ntroller unit is ending on use. tly with supply o the charger/ ng socket (25) 19) (Fig. 1) so necting cable. red contact of into place. To ntroller unit is lable memory g

ut of the cable

spring loaded For controlled hold the cable of the hasp. nspected. Set with the LEDs d digitally with 29) (Fig. 1) is itching on the eps to up to X age. age is rotated. mera image is to button (14) Record video Record video ring the video y, connect the f the controller h push cable, ses when the push the push o the same to wn button (4) disp

Other Analytical Instruments Manuals