Teeter Contour Power Assembly Instructions Manual

vary slightly from your model. Contour Power T E E T E R H A N G U P S 2 YEAR W A R R A N T Y ...

READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE. WARNING ! SAVE THESE INSTRUCTIONS FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH. BEFORE YOU BEGIN: Review all steps before beginning assembly and read all precautions before using the inversion table. Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity. Read and understand all ...

READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE. WARNING ! SAVE THESE INSTRUCTIONS FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH. BEFORE YOU BEGIN: Review all steps before beginning assembly and read all precautions before using the inversion table. Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity. • DO NOT operate wher ...

path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER - Improp ...

avoid damage to your new inversion table. IMPORTANT: The Table Bed Assembly is heavy – be sure to complete this step with two people. • Remove all cardboard and packing materials from the box. • To disengage the Table Bed from the A-Frame, carefully LIFT the support beam high enough to clear the Crossbar and Rubber Bumper on ...

A-Frame FlexTechnology TM Table Bed Head Pillow Bolts, Washers & Nuts (2) Chicago Post and Bolt (2) Pan Head Bolts (4) Decompression Arch TM Adjustable Acupressure Nodes (4pk) Main Shaft with Deluxe EZ-Reach TM Ankle Lock System Hand Grips Safety Keys (2) Tools 10/13mm Wrenches (2) 5mm Allen Wrench CP-1100 CP-1300 EP-1105 EP-1149 CP-0038 CP-1128 IA-1650 E6-1374 NX-1620 P1-1015 CP-1250 F5-1088 IA-1149 ITEMS FOR ASSEMBLY ITEM NUMBER Items ...

important components of your new Teeter Hang Ups® inversion table. Before Beginning Head Pillow FlexTechnology TM Table Bed Rotation Control Button Motor Housing Safety Keys Handles Spreader Arms De-Rattler Knob Height-Selector Locking Pin Main Shaft Crossbar A-Frame Deluxe EZ-Reach TM Ankle Lock System Ankle Comfort Dial TM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 6 10 12 3 4 5 ...

Important: Please review all labels and supporting materials before using your inversion table. We hope you enjoy your new Teeter Hang Ups Inversion Table! If you have any questions, please contact our Customer Service Department at 1.800.847.0143 or www.teeter-inversion.com. This drawing indicates the locations of the warning labels found on your product. If a label is missing, illegible or is removed, contact Customer Service at ...

• To stand the inversion table A-Frame upright, first move it onto its side (Figure 4), and then carefully lift it up onto its feet. • Open the A-frame wide enough so that it is stable and can stand upright on its own (Figure 5). • Lock the Spreader Arms to secure the legs into position. ...

IMPORTANT: The Table Bed Assembly is heavy - be sure to complete this step with two people. • Lift the Table Bed Assembly (CP-1300) and hold in inverted position. • Lower the Table Bed Assembly so the back of the Table Bed rests behind the Crossbar (Figure 6), and place the shrouds on either side of the motor housing onto the top of the A-Frame. • Using the Allen Wrench (IA-1 ...

• Leave the Table Bed in the inverted position. • Push on the Support Beam on the back of the Table Bed Assembly so that the two holes align evenly with the holes at the base of the Upper Support Arms (Figure 9). You may have to exert extra pressure to ensure that the Support Beam slides over the Rubber Spacers. • Insert the two bolts (EP-1128) into the open holes (Figure 9). • Fast ...

• Plug in the power supply. Be sure that the Hand Crank is not engaged in the motor and that the Safety Lock has been turned off (Figure 11). See Step 6 for more information on the Safety Lock. NOTE: The Safety Lock Key will remain in the lock when disabled and the table is in use. • Rotate the bed upright to the horizontal position (Figure 12) by pressing forward (towards Ankle Sys ...

• Insert a Hand Grip into the receiving end of the Table Bed Asssembly, located near the Motor Housing (Figure 15). • Screw in the handle and tighten (Figure 16). • Repeat with the other handle. FIGURE 15 FIGURE 16 ...

Inversion Table. Improper settings could result in serious injury or death! Safety Lock and Key (CP-1250) • The Safety Lock allows the table to be deactivated without the need to unplug the power supply. • Insert the Safety Key (CP-1250) and turn clockwise to disable the Safety Lock and engage the motor. The Safety Key will remain in place when the table is in-us ...

enough to remain stable, or secure to the wall to prevent tipping. In households with small children, the inversion table should be stored flat on the floor, not upright. WARNING ! Maintenance • Unplug the inversion table before performing maintenance. • To clean the Table Bed, wipe down with a damp cloth. • Do not use abrasive cleaners. Storing the Inversion Table • Loosen the ...

Specifications subject to change without notice. © COPYRIGHT 2012 Teeter. International Law Prohibits Any Copying. CP-1705 0712-2 Any modification to this device will void the UL Listing. MDSS GmbH Schiffgraben 41 30175 Hannover, Germany EC REP If you have any problems assembling the equipment, or questions about its use, please contact customer service at: USA: Teeter ...