Takeuchi TB216 Operator's Manual
Text of the manual
Safety alert Symbol
This symbol represents the safety alert.
The message that follows the symbol
contains important information about
safety.
Read and understand the message to
avoid personal injury or death.
It is the owner or employer’s responsibility
to fully instruct each operator in the
proper and safe operation of all
equipment. All persons using thi
Safety messages appearing in this manual
and on machine decals are identified by the
words “DANGER”, “WARNING” and
“CAUTION”. These signal words mean the
following:
DANGER indicates a hazard with a high
level of risk which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazard with a
medium level of r
This manual describes operation, inspection
and maintenance of the machine, as well as
safety instructions to be heeded during these
operations.
If you have any questions about the
machine, please contact a Takeuchi sales or
service outlet.
introduction
manual Storage compartment
A compartment for storing this manual is
provided at the position
front, rear, left and right
machine deScription
This manual refers the front, rear, left and
right of the machine as seen when sitting in
the operator’s seat with the dozer blade
visible to the front.
deSignated operationS
Use this machine primarily for the following
operations:
• Excavation
• Digging ditches
• Digging side ditches
• Leveling
�
noteS on reading thiS
manual
Please note that the descriptions and
diagrams included in this manual may not be
applicable to your machine.
The numbers used in the illustration are with
circles around them. The same numbers
appear between the parentheses in the text.
(Example:
(1))
Symbols used in this manual
The symbols used in this manual have the
foll
machine description ........................0-3
Safety ..............................................1-1
General precautions ................................1-2
Precautions when preparing ....................1-8
Precautions when starting .....................1-12
Precautions when operating ..
Operations possible with this
machine.............................................3-24
Parking the machine ..............................3-26
Parking ..............................................3-26
Inspection and checks after stopping
the engine..........................................3-26
Handling in cold climates .......................3-27
Prepari
Replacing the hydraulic oil and
cleaning the suction strainer ..............5-48
When required .......................................5-50
Replacing the bucket teeth ...............5-50
Replacing the bucket .........................5-52
Lubricating the levers .........................5-54
Inspecting the rubber crawlers ...........5-55
Replacing the rubb