Watchguard Firebox M200 Hardware Manual

ADDRESS 505 Fifth Avenue South Suite 500 Seattle, WA 98104 SUPPORT www.watchguard.com/support U.S. and Canada +877.232.3531 All Other Countries +1.206.521.3575 SALES U.S. and Canada +1.800.734.9905 All Other Countries +1.206.613.0895 ABOUT WATCHGUARD WatchGuard offers affordable, all-in-one network and content security solut ...

of use, and value. Powerful subscription-based security services boost protection in critical attack areas for multiple layers of defense. This guide introduces the Firebox M200 and M300, RoHS-compliant (lead-free ...

Hardware Specifications Package Contents  Firebox M200 or M300 device  Quick Start Guide  1 straight-through Ethernet cable (green)  1 cross-over Ethernet cable (red)  1 serial cable with an RJ-45 connector (console cable)  3 power cords (US, EU, UK)  2 rack mount ears  8 screws for rack mount ears  ...

 Install it in a network rack  Put it in a secure area, such as a locked room, to block the device from people who do not have permission to use it  Connect it to a conditioned power supply to prevent damage from sudden power ch ...

Hardware Specifications Hardware Description Front View Firebox M300 front panel: Left front: Buttons and Indicators Power ( ) The power indicator is green when the device is powered on. Arm/Disarm ( ) When the device is armed and ready to pass traffic, this indicator is green. When the device is powered on, but not ready to ...

 To reboot the Firebox, press and hold the Reset button for five seconds.  To reset the Firebox configuration to factory-default settings, use the procedure in “Restore Factory-Default Settings” on ...

Hardware Specifications Rear View Cooling fan The fan decreases the internal temperature of the device. The fan starts at maximum RPM when the device is powered on. The device adjusts the fan speed based on the external temperature and device CPU load. Power Switch Controls the power supplied to the device. AC receptacle Acce ...

1. Locate the two rack ears and eight mounting screws included with your Firebox. To attach each rack ear to the Firebox, use two large and two small screws. 2. Align the four holes in a rack ear with the four holes on one side of the Firebox. 3. Use two of the smaller screws ...

Hardware Specifications Safety Notices All WatchGuard products are designed and tested to meet strict safety requirements. These requirements include product safety approvals and other global compliance standards. Read these instructions carefully before you operate the product, and refer to them as needed for continued safe ...