Velleman CAMCOLD4 Operation & User’s Manual

PROFESSIONELE KLEUREN PTZ BUITENCAMERA CAMÉRA COULEUR PTZ PROFESSIONELLE POUR USAGE À L’EXTÉRIEUR CÁMARA DOMO PTZ COLOR PROFESIONAL PARA EXTERIORES PROFESSIONELLE PTZ-DOME-FARBKAMERA FÜR DEN AUßENBEREICH USER MANUAL GEBRUIKERSHANDLEIDING NOTICE D’EMPLOI MANUAL DEL USUARIO BEDIENUNGSANLEITUNG ...

1. Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) a ...

Before installing the camera, configure the camera ID and the communication protocol using the DIP switches. There are two sets of DIP switches. Note that the default protocol is Pelco-D with a baud rate of 2400 bps. a. Protocol Setting PRO0 Pin 1 PRO1 Pin 2 PRO2 Pin 3 Protocol / Baud ZM1 Pin 4 ...

desired installation spot. 2. Drill the mounting holes according to the pattern. 3. Fix the mounting bracket base onto the wall using the included tools. 4. Remove the dome from the housing wearing gloves so as not to leave fingerprints. 5. Remove the cushions protectin ...

• Select a camera (see “Selecting a Camera”). • Press I-, I+, Z-, Z+, F- or F+ to control the P/T or tilt the joystick to control the lens. Example: Controlling the P/T of camera n° 2. o Press 2 and the CAM key to select camera n° 2. o Tilt the joystick to control the camera P/T or use the ...

• Calling up the OSD o When in the OSD, press 96 and then the CALL key to set the dome camera. Tilt the joystick up or down to select a menu item. Use F- to confirm or F+ to cancel. • The Pattern o Press a numeric key (1~4) and hold the SAL key pressed for more than 2 seconds to set a pattern. Press a numeric ke ...

pattern using the F- key. Cancel the pattern using the F+. You can also use the OSD menu. Running a pattern: Choose a pattern (1~4) and press the SAL key. Deleting a pattern: Use the OSD menu. • Group Function: The group function allows you to ...

be displayed when modified. Camera Setup Set up the general functions of the camera. Tilt the joystick up or down to select the mode. If the LINE LOCK is activated, the video signal is synchronized with the AC power. The video can ...