Panasonic ET-MWP100G Technical Manual

video wall including up scaling of HD video source. Digital Signage – Rotated displays ensure an eye catching display. Command & Control - complex, linked Control Rooms. 2 ...

which has 4 inputs. Output A physical output from the mainframe. All cards have two outputs per card. Window An input window placed on a canvas. Canvas A number of video windows applied to a canvas. Layout An arrangement of one or more screens that will have a layout ...

DVI-U stands for DVI Universal – a TV One lead standard that uses a series of DVI adaptors to connect to a wide range of digital and analogue signals. With HDMI embedded audio is possible: Digital: HDMI, DVI-D, DVI-A Analogue: RGBHV, RGBs, YUV, YPbP, CV and Y/C The signal will be auto detected (except Y/C signals). This gives you mu ...

There are various types of modules which can be fitted to your CORIOmaster which must always include a CPU module and a Power Supply. For ease of identification the input/output cards are colour coded:- ¹Universal DVI allows the connection of a number of different adaptors for HDMI, VGA, Y/C, Composite, etc. ²Although other modu ...

For example, if you have 2 layouts, you can connect 2 outputs of one boards to one layouted displays. However, if you connect to 2 different layout from one output board, you cannot assign. 6 ...

areas together with asset lists and controls. The high level menus – Settings, Layouts, Canvases, Live and Comm Data – are used to configure and use the system:- Settings General This menu shows the software level and the number of inputs/outputs. Ethernet Us ...

Software Microsoft Windows XP + Windows 7, Windows 8 (32 or 64 Bit) Other applications Microsoft.NET.4, Microsoft Silverlight Connecting to ET-MWP100G The initial connection between the ET-MWP100G and the control PC should be via RS232 usin ...

the system via RS232 or using IP. The maximum Log size can also be set. Default TCP/IP setting: IP address : 192.168.0.10 Port : 10001 Please make sure to turn-off wireless signal, otherwise the system may get log-in failure. Both of these settings can be edited whilst logged in ...

Before you can start to create Canvases and Layouts you must first set up your Inputs and Outputs using the Settings Menu. In the Settings menu you can access General system data, set up Ethernet network connections and we set up the Inputs and Outputs. Please configure how many displays planning to use for the system since the ...