REL Longbow Operating Instructions Manual

Longbow Transmitter REL Acoustics Limited North Road, Bridgend industrial Estate . Bridgend, CF31 3TP . United Kingdom Telephone: +44 (0)1 656 768 777 . Fax: +44 (0) 1 656 766 093 Web: www.rel.net Longbow_Manual_08-14.indd 2-3 8/18/14 3:42 PM ...

turned our attention to connectivity methods. We asked consumers and industry professionals for input, and almost universally, the feedback was a request for wireless connectivity that matched the sonic performance of REL sub bass systems. In order to achi ...

While rare, a few systems, such as those that deliver a pure digital signal to active speakers, preclude the use of HIGH-LEVEL INPUT. To increase the versatility of connecting up, the REL Longbow™ transmitter has three separate inputs: A Neutrik Speakon socket ...

“HIGH-LEVEL INPUT.” This connection is made to the REL Longbow™ transmitter using the supplied 6’ 6” (2 meter) cable, the bare leads of which connect to the speaker output terminals of the power amplifier. The easy and foolpro ...

negative center channel speaker terminal; twist together the red and yellow wires and connect this pair to the positive center channel speaker terminal. • If connecting a REL as a dedicated rear channel sub, connect the black wire of the REL to ei ...

7 At this point the sub and transmitter should find each other and pair together. This will be indicated by the “Pair” LEDs on both the transmitter and control panel staying lit (no flashing). The REL Longbow™ transmitter can pair up to four subwoofers usin ...