Tektronix TDS3000C Series Declassification And Security Instructions

Declassification and Security 077-0091-00 ������������ 077009100 www.tektronix.com ...

suppliers, and are protected by national copyright laws and international treaty provisions. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes that in all previously published material. Specifications and price change privileges reserved. TEKTRONIX, TEK, and TekSecure are registered trademarks of Tektronix, Inc. Contacting Tektronix Tektronix, Inc. 14200 SW Karl Braun Drive P.O. Box 500 Beaverton, OR 97077 USA For product information, sales, service, and technical ...

1 Memory Erasure and Nonvolatile Memory Parts List The standard TDS3000C Series instruments contain a proprietary architecture based on a PowerPC and the VxWorks operating system. Instrument code and calibration settings reside in FLASH memory. Instrument setups and reference waveforms can be stored internally in FLASH or on the USB flash drive. Instrument code can be updated by the user from the USB flash drive. The latest firmware is available on www.tektronix.com. Loading firmware does not overwrite instrument calibration settings. Loading new firmware does not guarantee overwriting the inst ...

2 TDS3000C Series Declassification and Security Instructions To use the TekSecure function to erase FLASH memory: 1. Push the front-panel UTILITY button. 2. Push the System bottom bezel button until Config is selected. 3. Push the TekSecure Erase Memory bottom bezel button. 4. Push the OK Erase Setup & Ref Memory side bezel button. 5. Power off the oscilloscope; then power on the oscilloscope to complete the process. Disable LAN Ethernet Connectivity To disable LAN Ethernet connectivity: 1. Push the front-panel UTILITY button. 2. Push the System bottom bezel button until I/O is selected. 3. Push the Ethe ...

TDS3000C Series Declassification and Security Instructions 3 Memory Parts List The memory parts used in the TDS3012C, TDS3012C-NV, TDS3014C, TDS3032C, TDS3032C-AF, TDS3034C, TDS3052C, and TDS3054C oscilloscopes are shown in the following table. Table 1: TDS3000C series memory parts, board numbers 679-0259-XX and 679-0263-XX Part number Reference designator Description Use 156--7633--XX U540 IC, MEMORY; CMOS, SRAM; 128K X 18, SYNCHRONOUS, 10NS Synchronous SRAM: holds the display image. 156--7633--XX U550 IC, MEMORY; CMOS, SRAM; 128K X 18, SYNCHRONOUS, 10NS Synchronous SRAM: holds the live acquisition wave ...

4 TDS3000C Series Declassification and Security Instructions Application Module Memory Part The memory part used in the TDS3AAM, TDS3LIM, TDS3TMT, and TDS3VID application modules is shown in the following table. Table 2: Application module memory part, board number 679-4489-XX Part number Reference designator Description Use 156--6272--XX U1 IC, MEMORY; CMOS, EEPROM; 256 X 8, SERIAL EEPROM: holds the application module code. ...