Swecoin TTPM2 Installation And Programming Manual

Text of the manual

TTPM2 Installation and Programming Manual

September, 99 Related manuals TTPM2 Technical Specification, 00759-000 (old number: 38-1111-00) TTPM2 Service Manual, 00693-000 (old numbers: 38-1141-00, SWC-00693) The Service Manual covers the following subjects: • Functional description • Maintenance • Spare parts This is a publication of Swecoin AB Box 54

TTPM2 Installation and Programming Manual

3 CONTENTS 1 Introduction .................................................................................................................. 5 1.1 Document printing........................................................................................... 5 1.2 Magnetic encoding.........................

TTPM2 Installation and Programming Manual

September, 99 11 Interface description.................................................................................................. 49 11.1 DIP switches ................................................................................................. 49 11.2 Communications protocol ............................

TTPM2 Installation and Programming Manual

5 1 INTRODUCTION This document describes installation and operation of TTPM2 Ticket Printer/Encoder, which creates credit-card-wide documents with magnetic encoding and thermal printing. 1.1 Document printing TTPM2 uses the direct thermal printing technique and can print the entire thermosensitive surfa

TTPM2 Installation and Programming Manual

September, 99 2 INSTALLATION The TTPM2 comes as stand-alone printer with a cover and a built-in power supply and, or as an OEM printer mechanism for kiosk applications. Pushbuttons and indicators Document exit Optional front load mechanism SW95065C Figure 1. Front view, stand-alone printer, and OEM printer mechani

TTPM2 Installation and Programming Manual

7 2.1 Installing a stand-alone printer 1. Verify that the supply voltage range stated on the type plate is suitable for your local line voltage. 2. Connect the printer to a line outlet with safety ground. The ground potential should be the same as for the host computer. If ground potentials differ, use

TTPM2 Installation and Programming Manual

September, 99 2.2 Installing an OEM printer mechanism The TTPM2 OEM printer mechanism should be installed in some kind of enclosure such as a self-service kiosk. Preventing ESD and earth currents from affecting the printer operation requires proper connection of the printer chassis to protective earth through a mou

Other Printer Manuals