suprema FaceStation 2 Installation Manual

Introduction ...................................................................................................... 5 Components ........................................................................................................... ...

Warning Noncompliance of instructions could lead to serious injury or death. Installation Do not install the product in a place with direct sunlight, moisture, dust, or soot. • A fire or electric shock ma ...

• A product failure may occur. Manage the password with care not to disclose it to others and change the password periodically. • Otherwise, illegal intrusion may occur. Do not press the buttons on the product forcibly or using a sharp tool. • A product failure m ...

Note FaceStation 2 Wall bracket Fixing screw (4 EA) PVC anchor (4 EA) Diode (1 EA) Connection cable (2 pins 1 EA, 3 pins 1 EA, 4 pins 4 EA) Ferrite core (1 EA) Drilling template Quick guide 120 Ω resistor (1 EA) ...

Name Description Microphone Delivers the voice of the user when the interphone is connected. LCD screen Provides UI for operation. IR Camera Capture the infrared face image. Camera Capture an actual face image. RF card authentication unit Part to scan the card for entrance. Speaker Delivers sound. USB memory slot ...

Connect the power supply cable. Ethernet Connect the Ethernet cable. Wiegand input (4 pins) Connect the Wiegand input cable. Wiegand output (4 pins) Connect the Wiegand output cable. ...

Power supply Pin Name Color 1 PWR +VDC Red (white stripe) 2 PWR GND Black (white stripe) Relay Pin Name Color 1 RLY NO White 2 RLY COM Blue 3 RLY NC Orange RS-485 Pin Name Color 1 485 TRXP Blue 2 485 TRXN Yellow 3 485 GND Black 4 SH GND Gray TTL input Pin Name Color 1 TTL IN0 Red 2 TTL IN1 Yellow 3 TTL GND Black 4 SH GND ...

Cautions for registering a face • When registering a face, maintain a distance of 40cm to 80cm between the device and the face. • Be careful not to change the facial expression. (smiling face, drawn face, wink, etc.) • If you do not follow the instructions on the screen, the face regist ...

1 Determine the correct position to install the product using the provided drilling template. • The optimal height for installing device is 110 cm. • Install the device where it does not reach the direct sunlight. • Adjust the installation position so that the face is not exposed to direct ...