suprema bioentry w Installation Manual

Getting Started ................................................................................................ 4 Components ................................................................................................................ ...

and for preventing damage to the user's property. Warning Violation of the instructions may cause serious injury or death. Installation Instructions Do not install the product i ...

Note BioEntry W Bracket Software CD Mounting screws for product (2 pcs) Mounting screws for bracket (2 pcs) Diode Adapter ...

Name Feature LED lamp • Green: Authentication success • Red: Authentication failure • Pink: Reading card or fingerprint • Blue and sky-blue alternate flashing every 2 seconds: Normal operation • Red and pink alternate flashing every 2 seconds: The device is locked. • Blue and red alternate flashi ...

Pin Name Color 1 TTL IN1 Brown 2 TTL IN0 Purple 3 ENET TXP White 4 ENET TXN Orange 5 ENET RXP Black 6 ENET RXN Yellow 7 PWR +VDC Red 8 PWR GND Black 9 VB2 Blue VB2 Brown 10 VB1 Red VB1 Green 11 485 TRXN Yellow (White stripe) 12 485 TRXP Blue (White stripe) 13 485 GND Black (White stripe) 14 WG GND White (Black stripe) ...

Register a fingerprint correctly to improve the recognition rate of the fingerprint. BioEntry W can recognize a fingerprint even when the angle or position of the finger is changed. If you register a fingerprint with the following instructions, the recognition rate can be improved. Choosing a finger for registratio ...

1 With the mounting screws for the bracket, mount the bracket firmly onto the surface where BioEntry W is to be installed. If BioEntry W should be installed onto a concrete wall, make a hole with a drill, and then insert a PVC anchor into the hole before screwing the mounting screw. 2 Attach BioEnt ...

• Use a power adapter that has a DC 12 V (± 10%) specification of with the minimum current of 1,500 mA and has IEC/EN 60950-1 certification. If the power adapter is shared by other devices, the power adapter should provide a current more than the sum of the power consumption from this device (1,500 mA) and other devices. ...

TCP/IP LAN connection (connecting to a hub) A normal CAT-5 cable can be used to connect to a hub. LAN connection (connecting directly to a PC) BioEntry W can be connected directly to a PC by using a normal type CAT-5 cable because it supports an automatic MDI/MDIX function. BioEntry W PC BioEntry W Hub PC ...