suprema Xpass Manual 

Power Connection LAN Connection RS485 Connection 11 14 16 18 RS485 Connection Relay Connection Digital Input Connection Wiegand Input/Output 18 20 23 25 Output Installation of Wall-mount Bracket Inst ...

place subject to direct sun Do not place the device next to heating equipments. Safety Precautions place subject to direct sun light, humidity, dust or soot. to heating equipments. Do not place a magnet near the product. When cleaning, do not splash water on the device but wipe it out with a smooth cloth or t ...

Do not disassemble, repair or alter the device Safety Precautions alter the device. The warranty does net apply to any product damage cause by an arbitrary installation or repair. Do not let children touch the device without supervision. Do not use the device for any other purpose than specified. Do not damage the d ...

W ll M ti S K if Bl k Sh i k bl T b S ft CD Wall Mounting Screws (2 ea) Knife Blocks (2 ea) Shrinkable Tubes Software CD The components shown above may differ depending on the installation environment. -5- ...

When you install the Xpass or forget the network setting’s value of Xpass in use, can initial the network setting’s value (TCP/IP address, RS-485 setting) in the switch of Xpass’s back side as follows; setting s value (TCP/IP address, RS 485 setting) in the switch of Xpass s back side as follows; -9- ...

< Extended Bracket > < Front View > < Bracket > < Side View > -10- ...