Rane SM 26B Operator's Manual

Text of the manual

Realizing that in most areas there are laws against reading owners manuals, and that reading them under the blankets at night

with a flashlight makes you feel stupid, we therefore provide this brief, yet informative, description of how to use the SM 26B just in case your batteries are low and your m

Front Panel Description

1 MASTER OUTPUT LEVEL controls the amount of signal at the MIX OUTPUT jacks. It does not affect the level of any of the six MONO OUTs. This control changes the gain of the output stages. This allows an increase in headroom to eliminate over- loading due to excessive combined signal from one or more Inputs. Range of gain is fr

Rear Panel Description

1 Master LEFT & RIGHT INPUTS are balanced Tip-Ring-Sleeve (TRS) ¼" Inputs. These Inputs feed all six MONO OUTs when all MONO INs are not used. Connecting to individual MONO INs disconnects that channel from these Inputs (refer to the Block Diagram found on the SM 26B Data Sheet). For unbalanced operation use a standard mono �

©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 USA TEL 425-355-6000 FAX 425-347-7757 WEB www.rane.com

Operating Instructions Since numerous applications exist for the SM 26B, no single set of operational procedures control its use. The SM 26B Swiss Army Mixer RaneNote (included) explores the many configu- rations of the SM

Other Media Converter Manuals