TP-Link Omada EAP225 Installation Manual

Text of TP-Link Omada EAP225 Installation Manual

Indoor/Outdoor Access Point

EAP225-Outdoor EAP110-Outdoor Overview Package Contents Passive PoE Adapter (Mounting Bracket Included) Power Cord M3×28 Plastic Wall Anchors(Qty.4) M3×20 Self-tapping Screws (Qty.2) The Panel of EAP Panel Layout EAP RESET Shielded Ethernet Port LAN Note: EAP225-Outdoor does not support the Remote Reset feature. LED Status Indication Solid green The device is initializing or working properly . Flashes red

Option 3: Mounting the EAP on an Antenna

Step4: Attach the protective cap. Push and slide the protective cap down over the EAP until it firmly locks into place. Step1: Align the mounting tabs on the back of the EAP with the slot of the mounting bracket (for EAP). Push and slide the EAP downward until it locks into place. Step3: Connect the RF cables from the EAP to the corresponding connectors on the antenna. Note: Sector antenna is used as a demonstration

TP-Link Wireless Access Point Owners Instructions: