Toyota FT0001a Instructions Manual

■What is like " Bluetooth device”? By connecting Bluetooth portable Audio player (hereinafter called portable device) or Hands-free phone* which operation is confirmed, to the system, you will be able to use portable device without operating a portable device. * Including Audio player in a Hands-free phone. The operation of an adaptor for Bluetooth audio is not confirmed. You can check if the operation of you ...

• Don't leave portable device in the vehicle to prevent damage. (Under the scorching sun, temperature in a vehicle will be very high) • Don't use portable device near the system. It may cause the debased sound quality, or bad connection status. Note • If you would use other wireless equipment near this system. It may cause a bad effect on the connection of each device. • By connecting Bluetooth, the batt ...

To use Bluetooth audio, it is necessary to register a portable device in the following steps. ・ Up to 2 portable devices can be register in the system. ・ As for the operation of a portable device, see the users' manual that comes with it. 1. Press several times until "BT AUDIO" will appear. Then press the button indicated 'SETUP' in the screen. 2. While turning TUNE-SCROLL knob, s ...

When Bluetooth connection is disconnected due to low radio transmission circumstance, Bluetooth will perform an automatic connection. Note: The automatic connection will be performed only for certain duration of time. If the connection wouldn’t be established during the time, try it manually. Note: Some portable devices model may not support this function. ■When Bluetooth connection is disconnected on purpose The automatic re ...

You can reset each setting you have made before. 1. Press a button under the indicated “SETUP” on the display. 2. Find “System Setup” by turning TUNE-SCROLL knob and press the knob to select. 3. Then find “Initialize” by turning TUNE-SCROLL knob, and press the knob to select. 4. Then find “Confirm” by turning TUNE-SCROLL knob, and press the knob to completion. ■To delete the registration of a portabl ...

You can play the connected portable device. To use Bluetooth audio, you have to register the portable device on the system. About Indication on desplay Depending on portable device models, artist names, album name, or truck name may not be indicated on the display. To use Bluetooth Audio Register a portable device to the the system (see page 256) Note: Upon some portable device models, following circumstance may be caused by conn ...

image on the display. ・ Press button to pause. ・ And Press botton again to play trucks To Select an album Upon connecting to a portable device, See the previous page for the display image for Bluetooth audio operation. ・ To select previous album. Press ∨side of the botton ・ To select following album Press ∧side of the botton. Note: Some portable devices may not support th ...

Upon connecting to a portable device, ・ To scan an introduction of tracks Press button. This function will be performed in a method of portable device accordingly Note: Some portable devices model do not support this function. Play tracks on repeat Upon connecting to a portable device, Indication for each setting will be as follow. ・ RTP (without underline): Play without repeat ・ RTP (with underline): Current ...

You can choose a channel (Frequency) of broadcasting station. To select from pre-set channels Press button ・ To select higher channel Press ∧side of the botton ・ To select lower channel Press ∨side of the button To seek a channel automatically Press and hold SEEK-TRACK button until you hear blip. ・ To seek higher channel Press and hold ∧side of the botton ・ To seek lower channel Press and hold ∨side of the ...

Operation with a steering switch ■Steering audio switch ・Type A ・Type B 1. Volume up/down 2. ON-HOOK switch 3. OFF-HOOK switch 4. TALK switch ■Power on / off ・ To turn on power Press MODE switch ・ To turn off power Press and hold MODE switch until you hear blip. ■Volume adjustment Press the volume adjustment switch ・ To turn up the volume Press + ・ To turn down the volume Press - For your safety, adjust the vol ...

Operating the system by using a voice command By following voice guidance instructions output from the speaker, voice commands can be given to allow for the operation of the hands-free phone system without checking the display or operating a button or a knob. ■Operation procedure when using a voice command Press the talk switch on the steering and say the command for a desired function. ■Auxiliary commands when using a voice ...

menu Third menu Operation detail Callback - - Dialing a number stored in the incoming call history memory Redial - - Dialing a number stored in the outgoing call history memory Dial by number - - Dialing by inputting a number Dial by name - - Dialing by inputting a name registered in the phone book Add Entry - Adding a new number Change Name - Changing a name in the phone book Delete Entry - Deleting the phone book data D ...

First menu Second menu Operation detail Dial "XXX (name)" - Dialing a number registered in the phone book Phonebook add entry - Adding a new number Phonebook change name - Changing the name of a phone number in the phonebook Phonebook delete entry - Deleting phone book data Phonebook set speed dial - Registering a speed dial Phonebook delete speed dial - Deleting a speed dial Phonebook Unlock Unlocking the phone book Phonebook Phonebo ...

・ Dialing by inputting a number ”Dial by number” ・ Dialing by inputting a name ”Dial by name” ・ Speed dialing ・ Dialing a number stored in the outgoing history memory ”Redial” ・ Dialing a number stored in the incoming history memory ”Call back” ■Receiving a phone call ・ Answering the phone ・ Refusing the call ■Transferring a call ■Using the call history memory ・ Dialing ・ Storing data in the ph ...

A call can be transferred between the Hands-free phone and system while dialing, receiving a call, or during a call. Use one of the following methods: a. Operate the Hands-free phone. Refer to the manual that comes with the Hands-free phone for the operation of the phone. b. Press the OFF-HOOK switch on the steering *1 c. Press the TALK switch on the steering and say “ Call Transfer”*2 *1 This operation can be performed only when ...

Registering a Hands-free phone in the system allows the system to function. The following functions can be used for registered Hands-free phones: ■Functions and operation procedures To enter the menu for each function, follow the steps below by using a voice command or TUNE-SCROLL knob ・ Registering a Hands-free phone 1. “Setup” -> 2. “Phone Setup” -> 3. “Pair Phone” ・ Selecting the Hands-free phone to be used 1 ...

Selecting “ List phones” by using a voice command or TUNE-SCROLL knob causes the list of registered Hands-free phones to b read a loud. When listing is completed, the system returns to “Phone Setup” Pressing the TALK switch on the steering while the name of a Hands-free phone is being read selects the Hands-free phone, and the following functions will be available: ・ Selecting a Hands-free phone: “Select ...

■Setting a PIN 1. Select “Set PIN” by using a voice command or TUNE-SCROLL knob. 2. Enter a PIN by using a voice command or TUNE-SCROLL knob. When using TUNE-SCROLL knob, input the code 1 digit at a time. ■Changing the PIN 1. Select “Set PIN” by using a voice command or TUNE-SCROLL knob. 2. Enter the registered PIN by using a voice command or TUNE-SCROLL knob. 3. Enter a new PIN by using a voice command or TUNE-SCROL ...

• Adding a new phone number 1.“Phonebook” -> 2.“Add Entry” • Setting speed dial 1. “Phonebook” -> 2.“Set Speed Dial” • Changing a registered name 1. “Phonebook” ->2.“Change Name” • Deleting registered data 1. “Phonebook” ->2.“Delete Entry” • Deleting speed dial 1. “Phonebook” ->2.“Delete Speed Dial” • Listing the registered data 1. “Phonebook” ...

2-1 Select “Manual Input” by using TUNE-SCROLL knob. 2-2 Input a phone number by using TUNE-SCROLL knob, and presses it again. Input the phone number 1 digit at a time. >Selecting a phone number from outgoing or incoming call history 2-1 Select “Call History” by using a voice command or TUNE-SCROLL knob. 2-2 Select “Outgoing” or “Incoming” by using a voice command or TUNE-SCROLL knob. 2-3 ...