sauter SU Instruction Manual

Fax: +49-[0]7433-9933-149 Internet: www.sauter.eu Instruction Manual Digital Sound Level Meter SAUTER SU V. 1.3 08/2017 GB SU-BA-e-1713 PROFESSIONAL MEASURING ...

Instruction Manual Digital Sound Level Meter Thank you for buying a digital SAUTER sound level Meter. We hope you are pleased with your high quality instrument and its big functional range. Although this Sound Meter is a complex and advanced instrument, its ruggedness will allow many years of use if you will care ...

and other noise * Multi functional: it offers 4 measurement parameters: Lp (sound level), Lmax (maximum sound level), Leq (equivalent continuous A sound level) and Ln (percentage of all readings over alarm value set). * With alarm set and al ...

Internal memory: 30 values with measuring conditions Inbuilt calibration signal: 94dB at 1 kHz (sinusoidal) Frequency range: 20 to 12,500 Hz Alarm value set: 30-130 dB Alarm output: LED PC interface: RS 232C Low battery indication Power supply: 4 x 1.5V AAA (UM-4 battery) Dimension ...

3-8 Max Hold 3-9 Number memorized 3-10 Browsing Icon 3-11 Microphone 3-12 Display 3-13 Alarm LED 3-14 Weighting key 3-15 Fast/Slow key 3-16 Up/Save key 3-17 Down/Read key 3-18 Function key 3-19 Max Hold key 3-20 Power key 3-21 Delete/Menu 3-22 Cal. Adjusting 3-23 Jack for RS 232C interface 3-24 Jack for output 3-25 Jack f ...

or equal to the alarm value set by the user. For setting the alarm value, please see chapter 7. 4.3 It has to be checked whether the weighting is right. If not, it can be changed by pressing the key 3-14 to select “A”, “C” or “Flat”. With the ...

Leq is used to access the rms average noise level over a preset period of time, often the starting point of a noise assessment. To take the Leq measurement, the period of time which has to be tested, must be selected. The longer the period of measurement time, the more accurate the Leq reading will be. To set t ...

be switched ON. e) The CAL potentiometer of the device has to be adjusted in the way that the device’s display matches the output of the calibrator. 9.2 Calibration of the device by the inbuilt signal The instrument has to be s ...

5. Select Product: Sound Level Meter. 6. Press Save (A) button and leave this window by Exit (X). 7. Open Data Collection. 8. Press Continue Button- press button on SU 130 (e.g. FAST/SLOW) – Data acquisition Real Time starts ...

Readout of data starts and ends automatically with the last stored memory. 10. Select data (all which appears after “data in memory”)accordingly and continue processing. ...