OWC Express Assembly Manual & User Manual

Text of the manual

Introduction ..................................................................... 1

1.1 Minimum System Requirements 1.2 Drive Compatibility 1.3 Package Contents 1.4 Enclosure Features 1.5 About This Manual Device Setup ....................................................................... 2 2.1 Assembly Support Resources ...................................

1.1 Minimum System Requirements

Apple Mac Requirements • USB port: OS X 10.2 or later PC Requirements • USB port: Windows XP ® or later 1.2 Drive Compatibility • Any 2.5” SATA drive up to 9.5 mm tall 1.3 Package Contents * Cable will be USB 2.0 Mini-B or USB 3.1 Gen 1 Micro-B, depending on the model. 1.4 Enclosure Features

NOTE: The pictures used in these instructions depict the USB 3.1 Gen 1 version of

the OWC Express. The exact same steps are used for the USB 2.0 version; only the shape of the connector on the outside of the enclosure is different. In addition, your Express enclosure may be black rather than silver. 1. First, remove th

3. Use one hand to keep the drive from falling out of the bottom case, then flip the

case upside down to access the screw holes. Use a Phillips driver to install the two shorter screws in the holes highlighted below in red. This will secure the drive to the bottom case. When you have installed both screws, flip the bottom case back

5. Make sure the top cover is aligned with the bottom case. Hold the top cover and

the bottom case with one hand then flip the enclosure. Use a Phillips driver to install the two longer screws into the screw holes circled below. This will fully secure the top cover to the bottom case. The assembly process is now complete. The OWC E

3.1 Usage Notes

• To see a step-by-step walkthrough for migrating your data from an old drive to a new one, go to: www.owcdigital.com/support/data-transfer • The OWC Express is designed to receive all needed power through the USB cable, therefore a separate power adapter is not necessary. • For the safe removal of your d

The material in this document is for information purposes only and subject to change without notice. While reasonable

efforts have been made in the preparation of this document to assure its accuracy, OWC, its parent, affiliates, officers, employees, and agents assume no liability resulting from errors or omissions in this document, or from the use

Other Storage Manuals