LORUS Y704 Instruction Manual

Hour, minute, second, year, month, date and the day of the week. Automatic Calendar Function: Calendar adjusts automatically for odd and even months including Februaries of leap years. Time Display Format: Choice of time display format, either 12-hour display with AM/PM indicators or 24-hour display, is available. 2. DAILY ALARM: The alarm can be set to sound on a 24-hour basis. 3. STOPWATCH: The stopwatch can measure up to 9 hours 59 minutes and 59 seconds in 1/100 second increment. The stopwatch features the following functions. •Standard Measurement •Accumulated Elapsed Time Measurement •Lap Time Measur ...

1. Press button B to go to the Time/Calendar Mode. 2. Press button B for 2 seconds, the display changes to the Time/Calendar Setting Mode. The second numeral starts flashing. 3. Press button A to select an item to be adjusted. Items changes over in the following order. ✥ When an item is selected for adjustment, it starts flashing. 4. Use button C to adjust each item. ✥ For the second setting, while the second numeral is flashing, press button C in accordance with a time signal. The second numeral is reset to “00” and starts counting immediately. ✥ For the choice of time display format, each press of button C ...

morning and a “PM” indicator from the afternoon are displayed. ✥ Once year, month and date are set, the day of the week is automatically set accordingly. How to check the calendar I HOW TO SET THE ALARM 1. Press button B to go to the Alarm Mode. Alarm Mode indicator “AL” appears. 2. Press button B for 2 seconds to change the display to the Alarm Setting Mode. The hour numeral starts flashing. 3. Use button C to set the hour. ✥ Each press of button C advances the displayed numeral by one. Keep button C pressed to advance the numeral quickly. 4. Press button A to confirm the hour setting ...

• The stopwatch can measure up to 9 hours, 59 minutes and 59 seconds in 1/100-second increment. When the measurement is over 9 hours 59 minutes 99, the stopwatch will be reset to “0:00’00”00” and start counting again. Stopwatch operation Press button B to go to the Stopwatch Mode. • Even if the display is changed from the Stopwatch Mode to another while measurement is in progess, the stopwatch continues timing properly. However, after measurement is finished, be sure to reset the stopwatch in order to avoid wasting its battery energy. ✥ Press button A to reset the stopwatch after measurement. Alarm engagement/di ...

2. Use button A to reset the stopwatch. Accumulated Elapsed Time Measurement 1. Press button C to start, stop and restart the stopwatch as many times as required. 2. Use button A to reset the stopwatch Lap Time Measurement Up to 5 lap times can be displayed and recorded during measurement. In order to recall the recorded lap times after measurement, use Memory Recall Function before resetting the stopwatch. 1. Press button C to start the stopwatch. 2. Press button A to check lap time. The lap time is displayed and recorded while the measurement of total running time is still in pro ...

Fastest lap time Slowest lap number Slowest lap time A A A Lap number 1 Lap time for Lap 1 Lap time for Lap 2 Lap time for Lap 3 Lap number 2 Lap number 3 ✥ Use button C to display the lap times in the reverse order. 3. Press button B to return to the Time/Calendar Mode. I ILLUMINATING LIGHT Keep button D pressed. The light illuminates the display with 3 seconds delay. Up to Lap number 5 D I LUMIBRITE WATCH (dial, hands, buttons, case, bezel, strap, etc.) all- gui des co m ...

The miniature lithium battery Maxell batter y CR2032,which powers your watch, should last approximately 3 years. However, because it is inserted at the factory, the actual life of the battery once in your possession may be less than 3 years. Be sure to replace the battery to prevent any possible malfunction as soon as it runs down. To replace the battery, we recommend taking the watch to a local watch repair shop. I CARE OF YOUR LORUS WATCH This watch contains precise electronic components. Never attempt to open the case or remove the back cover. • BATTERY Do not expose the old battery to fire or recharge it. Keep it out of the ...

indicated, even if the watch head is water resistant. •ALLERGIC REACTION Because the case and band touch the skin directly, it is important to clean them regularly. If not, shirt sleeves may be stained and those with delicate skin may develop a rash. Please wear the watch with some play to avoid any possible allergic reaction. If you develop a rash on your wrist, stop wearing and consult a physician. •MAGNETISM/ STATIC ELECTRICITY Your watch will not be affected by magnetism generated by household electric appliances but keep your watch away from a place where the watch is subject to stro ...