Sony MP-CL1A Help Manual

3-MP0-107-02 ...

CAUTION Do not point the laser light directly at eyes or people, nor look into it. Doing so may cause serious injuries such as loss of eyesight.  Strap hole  Micro USB jack Use an AC power adaptor with a 1.5 A or greater output to charge the projector.   (power) button Press and hold the  (power) button for longer than 1 sec ...

Press the jog lever while at the ENTER position to display the menu. Slide it to + or − to move to next or previous menu item, then press while at the ENTER position to select the highlighted item.  Speaker  Built-in Wi-Fi antenna  HDMI/MHL IN jack  AUDIO OUT jack Connect headphones or speakers to this jack.  USB ...

Slide the Jog Lever to + or − while the menu is not displayed to adjust the volume. Checking the remaining battery power Press and quickly release the  button (within 1 second). The lamp blinks in orange, showing the battery status. The lamp blinks in one of the following patterns according to the remaining battery power. (Once): 0 ...

Navigating the Menu Learn how to navigate through the menu here. 1 Press the jog lever while at the ENTER position. The menu is projected. 2 Slide the jog lever to + or − to move to the next or previous menu item. 3 Press the jog lever while at the ENTER position with the desired menu item highlighted. One of the following is displayed accor ...

Slide the jog lever to + or − to move to the next or previous value, then press the lever while at the ENTER position with the desired value highlighted. Submenu Slide the jog lever to + or − to move to the next or previous submenu item, then press the lever while at the ENTER position with the desired item highlighted. The adjustme ...

shown in the bar, then press the lever while at the ENTER position to confirm. To exit the menu Press and hold the jog lever for about 2 seconds while at the ENTER position. ...

Close Exits the menu. Input change Selects an input source from HDMI/MHL and screen mirroring according to the connection method. Keystone Keystone Preset 1/ Preset 2/ OFF When using the lens cover stand (supplied) on a flat surface, select [ Keystone Preset 1] or [ Keystone Preset 2] according to the tilt of the projecto ...

value set here overwrites the selected preset value. H keystone Corrects horizontal distortion. The value set here overwrites the selected preset value. Flip (left-right) Flips the image horizontally. Use this mode for rear projection. To flip the image back to normal, select this menu again. ...

* Other items of the Picture setting are not available while [ Dynamic mode] is selected. Contrast Adjusts the contrast of the projected image. Hue Adjusts the color tones. Saturation Adjusts the color intensity. Bluetooth function Bluetooth function ON/OFF Turns on/off the Bluetoo ...