emaux LED-P100 Series Operating Procedures

Text of emaux LED-P100 Series Operating Procedures

LED-P100 Series Underwater Light

1-4 4-4 REPLACEMENT PARTS EMLI16022766 Never operate this Underwater Light for more than 10 seconds unless it is totally submerged in water. Without total submersion, the light assembly will get extremely hot, which may result in serious injury to pool users, installers, or bystanders, or in d

C) Winterizing: Light should be left in place for winterization.

2-4 120CM MIN. WATER LEVEL 6.6CM 29.6CM RIGID CONDUIT TO POWER SOURCE; FEED PARAFFIN CONCRETE MUST BE CUT BACK AROUND NICHE TO ALLOW FOR A COMPACT PLASTER SEAL 45CM MIN. FROM WATER LINE TO TOP OF LENS A) Preparatory steps which must be completed by the electrician before light is installed,

emaux Underwater lighting Owners Instructions: