Phonic XP6000 Operation & User’s Manual
Text of the manual
AMPLIFICADOR DE POTENCIA
ENGLISH .........................................I
ESPAÑOL .....................................II
APPENDIX .....................................III
V1.1 09/25/2017
English Español
XP6000
1. Read these instructions before operating this
apparatus.
2. Keep these instructions for future reference.
3. Heed all warnings to ensure safe operation.
4. Follow all instructions provided in this document.
5. Do not use this apparatus near water or in locations
where condensation may occur.
6. Clean only with dry cloth. Do not use aeroso
Thank you for choosing XP6000 power amplifier. The unit is
designed to provide a good combination of power, audio clarity,
reliability and durability. An efficient heat-dissipation system
comprising a high-surface area heat sink coupled with two
variable speed fans ensures quiet and reliable cooling. Good
sound quality and sturd
FRONT PANEL DESCRIPTION
1. CLIP/LIM LED (RED)
When the audio signal drives the amplifier output circuit beyond
its power capability, it will clip. The peak limiter detects this and
quickly reduces the gain to minimize the amount of overdrive, so
as to preserve as much of the program dynamics as possible.
2. PROTECT LED (YELLOW)
The power amp
REAR PANEL DESCRIPTION
9. FAN
Keep the front and rear vents clear to allow full airflow. Hot air will
be drawn out the back of the amplifier, so it does not stay in the
rack, and make sure plenty of cool air can enter the rack.
10. RESET BREAKER
With rated loads and output levels, the breaker should only shut
down the amplifier in rare insta
PARALLEL / STEREO / BRIDGE MONO
Turn the power off before changing the operation mode as to
avoid damaging your XP6000. The number 4 and 5 DIP switches
allow users to change between stereo and parallel input modes,
whereas DIP switches 7 and 8 are used to activate bridge mono
mode. DIP switches 6 and 9 are used to activate the Parallel and
B