Siemens RUGGEDCOM RS401 Installation Manual

2 Communication Ports 3 Technical Specifications 4 Dimension Drawings 5 Certification 6 RC1017-EN-05 ...

All rights reserved. Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized except where expressly permitted. Violations are liable for damages. All rights reserved, particularly for the purposes of patent application or trademark registration. This document contains proprietary information, which is protected by copyright. ...

Industry Sector 300 Applewood Crescent Concord, Ontario Canada, L4K 5C7 Telephone Toll-free: 1 888 264 0006 Tel: +1 905 856 5288 Fax: +1 905 856 1995 E-mail [email protected] Web www.siemens.com/ruggedcom ...

v Table of Contents Preface ............................................................................................................ vii Alerts ................................................................................................................................................. vii Related Documents ........................................................................................... ...

RUGGEDCOM RS401 Installation Guide vi 3.4.5  Connecting Multiple RS485 Devices ................................................................................... 19 Chapter 4 Technical Specifications .................................................................................. 21 4.1  Power Supply Specifications ........................................................................................................ 21 4.2  F ...

commissioning and important technical specifications. It is intended for use by network technical support personnel who are responsible for the installation, commissioning and maintenance of the device. It is also recommended for use by network and system planners, system programmers, and line ...

Accessing Documentation The latest user documentation for RUGGEDCOM RS401 v is available online at www.siemens.com/ruggedcom. To request or inquire about a user document, contact Siemens Customer Support. Training Siemens offers a wide range of educational services ranging from in-house training of standard courses on networking, Ethernet switches and ...

Ethernet switch, designed to operate reliably in electrically harsh and climatically demanding environments. Featuring an integrated 4 port serial server, a 4 port managed Ethernet switch, and an optional V.90 modem, the RS401 is able to interconnect multiple type ...

• Multi-level user passwords • SSH/SSL (128-bit encryption) • Enable/disable ports, MAC based port security • Port based network access control (802.1x) • VLAN (802.1Q) to segregate and secure network traffic • RADIUS centralized password management • SNMPv3 authentication and 56-bit encryption Ethernet Ports • Integrated Ethernet Switch – up t ...

1. POWER LED    2. ALARM LED    3. RESET Button    4. Ethernet Port Status LEDs    5. Serial Port Status LEDs    6. Power Supply Terminal Block    7. Surge Ground Terminal    8. RS232 Serial Console Port (DB9)    9. Modem Port (Optional)    10. Failsafe Alarm Relay POWER LED Illum ...

For more information about the various ports available for the RUGGEDCOM RS401, refer to Chapter 3, Communication Ports . RS-232 Console Port The serial console port is for interfacing directly with the device and accessing initial management functions. For information about c ...

Mounting the Device 5 Installing the Device This section describes how to install and connect to the RUGGEDCOM RS401. WARNING! Radiation hazard – risk of serious personal injury. This product contains a laser system and is classified as a CLASS 1 LASER PRODUCT. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation e ...

RUGGEDCOM RS401 Installation Guide 6 Mounting the Device on a DIN Rail NOTE For detailed dimensions of the device with either DIN rail or panel hardware installed, refer to Chapter 5, Dimension Drawings . CONTENTS • Section 2.1.1, “Mounting the Device on a DIN Rail” • Section 2.1.2, “Mounting the Device to a Panel” Section 2.1.1 Mounting the Device on a DIN Rail For DIN rail installations, the RS401 can be e ...

Connecting Power 7 1 2 1 1 Figure 3: Panel Mounting 1. Screw    2. Panel/DIN Rail Adaptor 2. Install the supplied screws to secure the adapters to the panel. Section 2.2 Connecting Power The RS401 supports a single integrated high AC/DC or low DC power supply NOTE • For 88-300 VDC rated equipment, an appropriately rated circuit breaker must be installed. • For 100-240 VAC rated ...

RUGGEDCOM RS401 Installation Guide 8 Connecting AC Power • Section 2.2.2, “Connecting DC Power” Section 2.2.1 Connecting AC Power To connect a high AC power supply to the device, do the following: CAUTION! Electrical hazard – risk of damage to equipment. Before testing the dielectric strength (HIPOT) in the field, remove the braided ground cable connected to the surge ground terminal and chassis ground. This cable ...

Connecting the Failsafe Alarm Relay 9 This cable connects transient suppression circuitry to chassis ground and must be removed in order to avoid damage to transient suppression circuitry during testing. 1. Connect the positive wire from the power source to the positive/hot (+/H) terminal on the terminal block. 1 2 3 Figure 5: Terminal Block Wiring 1. Positive/Hot (+/H) Terminal    2 ...

RUGGEDCOM RS401 Installation Guide 10 Grounding the Device 1 2 3 Figure 6: Failsafe Alarm Relay Wiring 1. Normally Open    2. Common    3. Normally Closed Section 2.4 Grounding the Device The RS401 chassis ground terminal uses a #6-32 screw. It is recommended to terminate the ground connection with a #6 ring lug and torque it to 1.7 N·m (15 lbf·in). 2 1 3 Figure 7: Chassis Ground Connection 1. Stainless St ...

Connecting to the Device 11 Siemens also does not recommend using copper Ethernet ports to interface with devices in the field across distances that could produce high levels of ground potential rise (i.e. greater than 2500 V), during line-to-ground fault conditions. Section 2.6 Connecting to the Device The following describes the various methods for accessing the ROS console and Web inter ...