Siemens SINUMERIK 840D sl Function Manual

Transformation (F2) 1 Gantry Axes (G1) 2 Cycle Times (G3) 3 Contour Tunnel Monitoring (K6) Axis Couplings and ESR (M3) 5 Setpoint Exchange (S9) 6 Tangential Control (T3) 7 Installation and Activation of Loadable Compile Cycles (TE01) 8 Simulation of Compile Cycles (TE02) 9 Clearance Control (TE1) 10 Analog Axis (TE2) 11 Speed/Torqu ...

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded ...

3 Preface SINUMERIK® Documentation The SINUMERIK documentation is organized in 3 parts: • General documentation • User documentation • Manufacturer/service documentation A monthly updated publications overview with respective available languages can be found in the Internet under: http://w ...

Standard version This documentation only describes the functionality of the standard version. Extensions or changes made by the machine tool manufacturer are documented by the machine tool manufacturer. Other functions not described in this documentation might be executable in the contr ...

5 Technical information The following notation is used in this documentation: Signal/Data Notation Example NC/PLC interface signals ... NC/PLC interface signal: Signal data (signal name) When the new gear step is engaged, the following NC/PLC interface signals are set by the PLC program: ...

Technical Support If you have any technical questions, please contact our hotline: Europe / Africa Asia / Australia America Phone +49 180 5050 222 +86 1064 719 990 +1 423 262 2522 Fax +49 180 5050 223 +86 1064 747 474 +1 423 262 2289 Internet http://www.siemens.com/automation/support-re ...

Special functions: 3-Axis to 5-Axis Transformation (F2) Function Manual 11/2006 6FC5397-2BP10-2BA0 Valid for Control SINUMERIK 840D sl/840DE sl SINUMERIK 840Di sl/840DiE sl SINUMERIK 840D powerline/840DE powerline SINU ...

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded ...

Function Manual, 11/2006, 6FC5397-2BP10-2BA0 3 Table of contents 1 Brief description......................................................................................................................................... 5 1.1 5-axis Transformation ...................................................... ...

Special functions: 3-Axis to 5-Axis Transformation (F2) 4 Function Manual, 11/2006, 6FC5397-2BP10-2BA0 2.8.2 Orientation movements with axis limits....................................................................................... 63 2.8.3 Orientation compression .......................................................................... ...