SEI MS070400TX Assembly Instruction Manual

Text of SEI MS070400TX Assembly Instruction Manual

For assistance with assembly contact:

Southern Enterprises Inc. Customer Service 1-800-633-5096 [email protected] www.seidal.com Large TV/Media Stand MS070300TX- ANTIQUE WHITE MS070400TX- ANTIQUE BLACK Assembly Instructions PO:

Large TV/Media Stand

Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below. You may receive extra hardware with your unit. 2 3 Quantity of 1 Quantity of 1 Quantity of 1 Bottom Panel Left Side Panel 4

Large TV/Media Stand

Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below . You may receive extra hardware with your unit. Assembly Tool Required No. 2 Phillips Screwdriver (A) 8mm x 30 mm Wood Dowel

Large TV/Media Stand

Assembly Instructions Assembly Instructions: Wood may scratch easily. Be careful when assembling. Do not scratch. Step 1. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated on the front page. Step 2. Insert two Wood Dowels (A) into predrilled holes in Side Panel(2,3) each and two Wood Dowels(A) in

Large TV/Media Stand

Assembly Instructions Step 1. Insert Wood Dowels(A) in predrilled holes in the Left Middle Panel(5) and Wood Dowels (A) in the other side of Fixed Shelf(6). Be sure the cross bar on the Left Middle Panel(5) faces the Right Side Panel(3). Step 2. Attach Left Middle Panel(5) to the Bottom Panel(1) and fasten by Bolts(B). Step 3. Screw Feet(8) and center foot(18) into Bottom Panel(1) and t

Large TV/Media Stand

Assembly Instructions Step 1. Insert the Wood Dowels(A) into Predrilled top holes in Side Panels(2,3) and Middle Panel(4,5). Step 2. Attach the Top Panel (11) into the Panels(2,3,4,5) with Bolts(B) and tighten. Figure 6 Figure 8 Step 1. Insert Back Panel(12) into grooves of side panels with Screw For Back(C) and tighten. (C) 3.5mm x 12 mm Screw For Back Quantity of 20 3/16” x

Large TV/Media Stand

Assembly Instructions Figure 9 Figure 10 Figure 11 5/32” x 22mm Bolt For Wood Knob (G) Quantity of 2 (F) Wood Knob Quantity of 2 5/32” x 22mm Bolt For Wood Knob (G) Quantity of 2 (F) Quantity of 2 Wood Knob (H) Quantity of 8 Metal Pin Step 1. Put the Drawer Bottom Panel(15) into inner grooves of Drawer Side Panels(14) and Drawer Face Panel(13). Step 2. Insert Nut(D) into predrilled holes

Customer Service 1-800-633-5096

[email protected] Southern Enterprises, Inc. 600 Freeport Parkway, Suite 200 Coppell, Texas, 75019 Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt

The top shelf is intended for a flat screen television with a maximum overall width

of 50” and supports up to 175 lb. The top shelf is NOT INTENDED for tube televisions. Each center shelf should not be loaded with more than 20 lb. Each side shelf should not be loaded with more than 15 lb. DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the maximum sizes and weights indicated

SEI Indoor Furnishing Owners Instructions: