SEI HZ104800TX Assembly Instruction Manual
Text of SEI HZ104800TX Assembly Instruction Manual
Page | 1
HZ104800TX
Wine/ Bar Cabinet
Assembly Instruction
For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
PO# 13412
Page | 2
HZ104800TX
Wine/ Bar Cabinet
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage. Before beginning assembly,
separate each type of screw. Carefully study the screw diagrams below.
You may receive extra hardware with your unit.
A 1pc
Left Top Panel
B 1pc
Ri
Page | 3
HZ104800TX
Wine/ Bar Cabinet
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage. Before beginning assembly,
separate each type of screw. Carefully study the screw diagrams below.
You may receive extra hardware with your unit.
1 26pcs
Wood Dowel
( Ø5/16 X 1”)
2
Page | 4
HZ104800TX
Wine/ Bar Cabinet
Assembly Instructions
Step 1:
Insert Wood Dowels (1) and
screw Cam Bolts (2) into Left
Back Panel (M) and Right
Back Panel (N).
Attach Upper Side Shelves
(O) and Lower Side Shelves
(P) with Back Panels (M) & (N)
using Cam Locks (3).
Turn Cam Locks clock-wise to
secure panels (P) & (O).
Step 2:
Screw Cam Bolts (2) to Left &
Right Side Panels (I) & (J).
Attach assembled panels from
Step 1 to Left Side Panel (I)
and Right
Page | 5
Step 3:
Insert File Rods (Z) into
corresponding holes.
Attach Left Front Panel (K)
and Right Front Panel (L)
using Wood Dowels (1), Cam
Bolts (2) and Cam Locks (3).
Note: Make sure to attach
the File Rods (Z) onto both
units.
Step 4:
Attach Door Hinges (13) to
Shelf (Y) using supplied
Screws for hinges.
Attach Shelf (Y) to Door Panel
(D) as shown.
K
I
J
L
2
1
3
Z
Z
Z
Z
Page | 6
Step 5:
Attach assembled unit from
Step 3 that has Right Side
Panel (I) to assembled unit
from Step 4 using Wood
Dowels (1), Barrel Nuts (7),
Spring Washers (5), Flat
Washers (6) and Bolts (4).
Tighten with Allen Wrench
(17).
Note: Make sure threaded
holes in Barrel Nuts are facing
adjacent holes where Bolts will
come through to meet.
Also note placement of
grooves and make sure to
match as shown.
Step 6:
Attach Magnets (14) to Left
Side Panel (I)
Page | 7
Step 7:
Attach Support Bar (C) using
Wood Dowel (1), Cam Bolt (2)
and Cam Lock (3).
Slide Back Panel (E) into
grooves of Support Bar (C)
and Shelf (Y).
Step 8:
Attach Right Side Panel (J) to
Shelf (Y) and Support Bar (C)
using Wood Dowels (1), Cam
Bolts (2), Cam Locks (3),
Barrel Nuts (7), Spring
Washers (5), Flat Washers (6)
and Bolts (4).
Tighten Bolts with Allen
Wrench.
3
1
2
E
I
C
C
Y
J
7
17
4
5
6
1
3
2
1
Page | 8
Step 9:
Attach Bottom Shelf (G) using
Spring Washers (5), Flat
Washers (6), Barrel Nuts (7)
and Bolts (4).
Tighten Bolts with Allen
Wrench.
Step 10:
Attach Legs (H) using Spring
Washers (5), Flat Washers (6)
and Bolts (4).
H
H
H
H
17
4
5
6
G
F
4
5
6
7
1
Page | 9
Step 11:
Attach Door Hinges (16) using
Screws (12).
Attach Knob (11) using Bolt
(10).
Step 12:
Insert Wood Dowels (1) into
corresponding holes.
Place Left Top Panel (A) and
Right Top Panel (B) on to top
as shown.
Secure using Spring Washers
(5), Flat Washers (6) and Bolts
(8).
Tighten with Allen Wrench.
A
B
1
6
5
8
D
12
12
16
10
11