Tripp Lite SNMPWEBCARD Installation Instructions Manual

chance to win a FREE Tripp Lite product! www.tripplite.com/warranty SNMP/Web Management Accessory Card Model: SNMPWEBCARD 1111 W. 35th Street, Chicago, IL 60609 USA www.tripplite.com/support Read this manual carefully before installation. A separate User's Guide (PDF format) is included ...

discharge) precautions to avoid damaging the card. For your safety, you should also read the documentation that came with your UPS system or PDU to familiarize yourself with precautions against electric shock. The SNMPWEBCARD allows users to operate any compatible Tripp Lite UPS Sys ...

Configuration Settings 3-1 Determine IP Information: The SNMPWEBCARD can support a single static IPv4 address (requires setting the IP address, subnet mask and gateway) and/ or a single IPv6 static address. In addition the SNMPWEBCARD can support a single static IPv4 or an IPv6 DNS address that is required t ...

you may also need to specify VT100 emulation C . A 3-2 Configure Terminal Emulation Program: Open a VT100-compatible terminal emulation program (such as the HyperTerminal program bundled with Microsoft® Windows®) on a computer with an available DB9 serial port. Note: If a DB9 port is n ...

the UPS, use the mini-DIN to DB9 serial cable (part number 73-1025) included with the card to connect the card to the computer. The circular connector A at one end of the cable attaches to the 8-pin mini-DIN serial port B on the card. (Align the connector carefully to avoid damaging the ...

reboot is required. A reboot can be accomplished in a fe ...

7 �������������������� ���������������������������������������������� ����������������������������������������������� ������ ...

These prompts allow you to modify the hardware parameters of the SNMPWEBCARD such as time and date settings. ������������������������������������������������������� �������������� ...

These prompts help define the security levels and access for the SNMPWEBCARD and its users. Note: If you choose to edit your Root Password, keep records of the change in a place easily accessible to your network administrators. Tripp Lite CANNOT recover, edit or override changed Root Passwords if they have been lost or forgotten. T ...

For Example: default=rw indicates the user has read write access to every facility not otherwise specified. This is the level of access user “localadmin” has. default=rw, security=none indicates that the user has rw access to every facility, but due to the addition of the security facility tag, th ...