Philips HQ9080 Manual 

Text of the manual

HQ9080, HQ9070 EnglisH 4 Български 14 ČEština 25 EEsti 35 Hrvatski 44 Magyar 54 ҚазаҚша 64 liEtuviškai 75 latviEšu 85 Polski 95 roMână 106 русский 116 slovEnsky 127 slovEnšČina 137 srPski 147 українська 157

Read this user manual carefully before you use the

appliance and save it for future reference. - This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Charging Make sure the appliance is switched off before you start to charge it. Charging t

, HQ9080: the battery symbol starts to flash

green. , HQ9070: the battery symbol starts to flash green. Battery running low - HQ9080: When the battery is running low, the battery symbol starts burning red. When you switch off the shaver, this symbol flashes red. - HQ9070: There is no warning or indication when the battery is running low. The appliance swi

2 Move the shaving heads quickly over your skin,

making both straight and circular movements. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 3 Press the on/off button once to switch off the shaver. 4 Put the protection cap on the shaver every time you have used it, to preven

Every day: shaving unit and hair chamber

1 Switch off the shaver, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 2 Press the release button (1) and open the shaving unit (2). 3 Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. Make sure the inside of the shaving unit and

2 Clean the cutters and guards with the brush

supplied. Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 3 Put the shaving heads back into the shaving unit. Put the retaining frame back into t

, Put the protection cap on the shaver to prevent

damage. , Store the appliance in the luxury pouch or place the appliance in the stand. replacement Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ9 Philips SmartTouch shaving heads only. 1 Switch off the shaver, remove the powerp

The following accessories are available:

- HQ9 SmartTouch Shaving Heads - HQ110 Philips Shaving Head Cleaning Spray Environment - Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment. - The built

Other Electric Shaver Manuals