Trikdis SP231 Installation And Programming Manual

Text of Trikdis SP231 Installation And Programming Manual

Control Panel SP231

General properties  8 zones (possibility to expand to 32);  9 zone functions;  Exclusive zone for two-wire smoke detector;  8 partitions;  Internal clock;  Control of temperature sensors;  Tamper tracking;  Anti-Masking tracking;  Convenient default settings for fast instal

Control Panel SP231

Warranty and liability limitations The control panel is provided with a 24 months warranty to become effective from the purchase-sales date. The warranty period shall ensure free of charge repair of troubles occurred due to the manufacturer fault. The warranty shall be applied, if the control panel i

Control Panel SP231

Safety requirements Prior to using the control panel, you must get familiar with this manual. Control panel SP231 – electrical facility, thus it shall be installed and serviced only by qualified specialists following this document. During installation of the control panel its power supply must be sw

Control Panel SP231

Content 1 TECHNICAL PARAMETERS .................................... 6 2 ALARM SYSTEM POWER SUPPLY ......................... 7 2.1 MAIN SUPPLY ..................................................... 7 2.2 BACK-UP SUPPLY ................................................. 7 2.3 BATTERY SUPPLY ..............

Control panel SP231

Technical parameters ©1997-2015 Trikdis 6 www.trikdis.com 1 Technical parameters Name Description Value Units Supply voltage From alternating current source 16-18 V From direct current source 16-24 V Current consumption In standby mode 80 mA When sending data Up to 150 mA Between [AUX+] and [C] terminals Output DC voltage (level of impul

Trikdis Control Panel Owners Instructions: