PR 5725 Manual 

P r o g r a m m a b l e f r e q u e n c y i n d i c a t o r N o . 5 7 2 5 V 1 0 2 - U K F r o m s e r . n o . > 1 2 1 4 3 5 0 0 1

signalbehandlingsmoduler til industriel automation. Programmet består af Isolatorer, Displays, Ex-barrierer, Temperaturtransmittere, Universaltransmittere mfl. Vi har modulerne, du kan stole på i selv barske miljøer med elektrisk støj, vibrationer og temperaturudsving, og alle produkter opfylder de strengeste internationale standarder. Vores motto »Signals the Best« er indbegrebet af denne filosofi – og din garanti for kvalitet. PR electronics A/S offers a wide range of analog and digital signal conditioning devices for industrial automation. The product range includes Isolators, Displays, Ex Interfaces, Temperature Transmitters, and Universal Devices. You can trust our products in the most extreme environments with electrical noise, vibrations and temperature fluctuations, and all products comply with the most exacting international standards. »Signals the Best« is the epitome of our philosophy – and your guarantee for quality. PR electronics A/S offre une large gamme de produits pour le traite ment des signaux analogiques et numériques dans tous les domaines industriels. La gamme de produits s’étend des transmetteurs de température aux afficheurs, des isolateurs aux interfaces SI, jusqu’aux modules universels. Vous pouvez compter sur nos produits même dans les conditions d’utilisation sévères, p.ex. bruit électrique, vibrations et fluctuations de température. Tous nos produits sont conformes aux normes internationales les plus strictes. Notre devise »SIGNALS the BEST« c’est notre ligne de conduite - et pour vous l’assurance de la meilleure qualité. PR electronics A/S verfügt über ein breites Produktprogramm an analogen und digitalen Signalverarbeitungsgeräte für die in- dustrielle Automatisierung. Dieses Programm umfasst Displays, Temperaturtransmitter, Ex- und galvanische Signaltrenner, und Universalgeräte. Sie können unsere Geräte auch unter extremen Einsatzbedingungen wie elektrisches Rauschen, Erschütterungen und Temperaturschwingungen vertrauen, und alle Produkte von PR electronics werden in Überein stimmung mit den strengsten internationalen Normen produziert. »Signals the Best« ist Ihre Garantie für Qualität! DK UK FR DE

5725 CONTENTS Warning ....................................................................................................... 2 Safety instructions ................................................................................. 3 Front and back layout ........................................................................... 5 Application ................................................................................................. 6 Technical characteristics ...................................................................... 6 Mounting / installation ......................................................................... 7 Application ................................................................................................. 8 Order: 5725 ............................................................................................... 9 Electrical specifications........................................................................ 9 Sensor error indication, inside and outside range .................... 13 Connections .............................................................................................. 15 Block diagram ........................................................................................... 16 Configuration / operating the function keys ............................... 17 Password protection .............................................................................. 18 Additional 5725 features (from s/n > 121435001) ................ 18 Routing diagram for 5725A ............................................................... 19 Routing diagram for 5725D ............................................................... 21 Scrolling help texts ................................................................................ 23 Graphic depiction of the relay function setpoint....................... 25

situations. The CE mark proves the compliance of the device with the essential requirements of the directives. WARNING This device is designed for connection to hazardous electric volt- ages. Ignoring this warning can result in severe personal injury or mechanical damage. To avoid the risk of electric shock and fire, the safety instructions of this manual must be observed and the guidelines followed. The specifications must not be exceeded, and the device must only be applied as described in the follow- ing. Prior to the commissioning of the device, this manual must be examined carefully. Only qualified personnel (technicians) should install this device. If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. WARNING Until the device is fixed, do not connect hazardous voltages to the device. The following operations should only be carried out on a discon- nected device and under ESD safe conditions: Troubleshooting the device. Repair of the device must be done by PR electronics A/S only. GENERAL HAZARD- OUS VOLTAGE

to 1000 Volt AC. Technicians are qualified persons educated or trained to mount, operate, and also troubleshoot technically correct and in accordance with safety regulations. Operators, being familiar with the contents of this manual, adjust and operate the knobs or potentiometers during normal operation. RECEIPT AND UNPACKING Unpack the device without damaging it. The packing should always follow the device until this has been permanently mounted. Check at the receipt of the device whether the type corresponds to the one ordered. ENVIRONMENT Avoid direct sunlight, dust, high temperatures, mechanical vibrations and shock, as well as rain and heavy moisture. If necessary, heating in excess of the stated limits for ambient temperatures should be avoided by way of ventilation. All devices fall under Installation Category II, Pollution Degree 2, and Insulation Class II. MOUNTING Only technicians who are familiar with the technical terms, warnings, and instructions in the manual and who are able to follow these should connect the device. Should there be any doubt as to the correct handling of the device, please contact your local distributor or, alternatively, PR electronics A/S www.prelectronics.com Mounting and connection of the device should comply with national legislation for mounting of electric materials, i.e. wire cross section, protective fuse, and location. Descriptions of Input / Output and supply connections are shown in the block diagram and side label.

The max. size of the protective fuse is 10 A and, together with a power switch, it shall be easily accessible and close to the device. The power switch shall be marked as the disconnecting unit for the device. UL INSTALLATION REQUIREMENTS For use on a flat surface of a type 1 enclosure. Use 60/75°C copper conducters only. Enclosure rating (face only)........................... Type 4X, UL50E Max. ambient temperature ............................ 60°C Max. wire size, pins 41...46 ........................... AWG 30-16 Max. wire size, others ...................................... AWG 30-12 UL file number .................................................... E248256 CALIBRATION AND ADJUSTMENT During calibration and adjustment, the measuring and connection of external voltages must be carried out according to the specifications of this manual. The technician must use tools and instruments that are safe to use. NORMAL OPERATION Operators are only allowed to adjust and operate devices that are safely fixed in panels, etc., thus avoiding the danger of personal injury and damage. This means there is no electrical shock hazard, and the device is easily accessible. CLEANING When disconnected, the device may be cleaned with a cloth moistened with distilled water. LIABILITY To the extent the instructions in this manual are not strictly observed, the custom er cannot advance a demand against PR electronics A/S that would otherwise exist according to the concluded sales agreement.

5725 • Measures NPN, PNP, Contact, NAMUR, SO, Tacho and TTL sensors • Programmable frequency input span of 0.001 Hz to 50 kHz • The 5725D has two SPDT relays and one analog output • Easy to read 4 digit, 14 segment LED display with scrolling help text • Universally powered by 21.5…253 VAC or 19.2… 300 VDC Application • The 5725 measures, scales, and displays frequency signals found in many pro- cess speed and flow rate applications. • The indicator can measure the period of the frequency, useful for displaying the elapsed time between events. • The 5725D has two SPDT setpoint contacts and a 0/4...20 mA output for pro- cess control. • The installed display provides IP65 environmental sealing, and additional pro- tection is provided by the optional 8335 splash proof cover. Technical characteristics • 4 digit display w/13.8 mm high, 14 segment LED digits and adjustable decimal point. • Indicator is scalable from -1999 to 9999 • Scrolling help text makes programming easy. • Built-in excitation source for measuring NPN, PNP, NAMUR and SO sensors. • Fast response time of 1 cycle + 100 mS, and excellent accuracy of better than 0.05% of selected range. • The analog output current on the 5725D can be dampened from 0.1 to 60 seconds, and can handle up to 800 Ohms loop load.

harsh EMC environments. • High 2.3 kVAC galvanic isolation, and an excellent signal/noise ratio of > 60dB. Mounting / installation • Easy to mount 1/8 DIN (48 x 96 mm) panel meter with IP65, (type 4X) sealing. • Approved for marine applications. • Fully push-button programmable. • Password protected.

Special trig current & voltage NAMUR Tacho Supply: 21.6...253 VAC or 19.2...300 VDC S0 PNP NPN Contact (NPN) TTL Input signals: + Sup 5...17 V + Input Input gnd Tacho Relay 2 + Supply + Supply

Storage temperature .............................................. -40°C to +85°C Calibration temperature ........................................ 20...28°C Relative humidity..................................................... < 95% RH (non-cond.) Protection degree .................................................... IP20 Installation in pollution degree 2 & measurement / overvoltage category II. Mechanical specifications: Dimensions (H x W x D)......................................... 48 x 96 x 120 mm Cutout dimensions .................................................. 44.5 x 91.5 mm Protection degree (mounted in panel) ............ IP65 / Type 4X, UL50E Weight .......................................................................... 230 g Wire size, pin 11-12 & 41-44, max .................. 1 x 1.5 mm2/ AWG 30...16 stranded wire Wire size, others, max ............................................ 1 x 2.5 mm2/ AWG 30...12 stranded wire Terminal connection ............................................... Spring-cage Vibration ...................................................................... IEC 60068-2-6 Test FC 2...13.2 Hz ........................................................... ±1 mm 13.2...100 Hz ..................................................... ±0.7 g Order: 5725 Type Version 5725 Standard. . . . . . . . . . . . . . . . . . . . . . . : A Analog output and 2 relays . . . . . : D 8335 = Splash proof cover Accessories:

Supply voltage, universal ..................................... 21.6...253 VAC, 50...60 Hz or 19.2...300 VDC Power consumption, 5725A / 5725D ............. < 2.8 W / < 3.6 W Isolation voltage, test / operation .................... 2.3 kVAC / 250 VAC Signal / noise ratio .................................................. > 60 dB Input specifications: Frequency range, f/I conversion function ................................ 0.001 Hz to 50 kHz Low cut off frequency (default value) ............ 0.0009 Hz Low cut off frequency, (LCOF=YES) ................. 0.5 Hz (2 s) Max. frequency, with input filter ON ............... 50 Hz Time range, period time function ................... 999.9 s to 20 µs Low cut off period time ........................................ 1111 s Min. period time with input filter ON .............. 20 ms Response time (0...90%, 100...10%) ................. < 1 period + 100 ms Input types: NAMUR input - acc. to EN 60947-5-6: Trig-level LOW ........................................................... ≤ 1.2 mA Trig-level HIGH .......................................................... ≥ 2.1 mA Input impedance ...................................................... 1 kΩ / < 1.5 nF Breakage detection ................................................. ≤ 0.1 mA Short-circuit detection ........................................... ≥ 6.9 mA Sensor supply - pin 44, fixed .............................. 8.3 V Accuracy values Specification Absolute accuracy Temperature coefficient Input to Display & Relays ≤ ±0.05% ≤ ±0.01% / °C Input to Analog Output ≤ ±0.1% EMC immunity influence ...................................................... < ±0.5% of span Extended EMC immunity: NAMUR NE 21, A criterion, burst ..................................... < ±1% of span

Trig-level HIGH .......................................................... ≥ + 50 mV Input impedance ...................................................... ≥ 100 kΩ / < 1.5 nF Max. input voltage .................................................. 80 VAC pp Sensor supply - pin 44, programmable .......... 5...17 V / 20 mA NPN / PNP input: Trig-level LOW ........................................................... ≤ 4.0 V Trig-level HIGH .......................................................... ≥ 7.0 V Input impedance ...................................................... 3.48 kΩ / < 1.5 nF Sensor supply - pin 44, programmable .......... 5...17 V / 20 mA TTL input: Trig-level LOW ........................................................... ≤ 0.8 VDC Trig-level HIGH .......................................................... ≥ 2.0 VDC Input impedance ...................................................... ≥ 100 kΩ / < 1.5 nF Sensor supply - pin 44, programmable .......... 5...17 V / 20 mA S0 input acc. to DIN 43864: Trig-level LOW ........................................................... ≤ 2.2 mA Trig-level HIGH .......................................................... ≥ 9.0 mA Input impedance ...................................................... 758 Ω / < 1.5 nF Sensor supply - pin 44, fixed .............................. 17 V Special voltage input: User programmable trig-levels ........................... -0.05...6.50 V Hysteresis, min ......................................................... 50 mV Input impedance, selectable: High Z ................................................................... ≥100 kΩ / < 1.5 nF Pull up and pull down ..................................... 3.48 kΩ / < 1.5 nF Sensor supply - pin 44, programmable ........... 5...17 V / 20 mA Special current input: User programmable trig-levels ........................... 0.0...10.0 mA Hysteresis, min ......................................................... 0.2 mA Input impedance ...................................................... 1 kΩ / < 1.5 nF Sensor supply - pin 44, programmable .......... 5...17 V / 20 mA

Decimal point ............................................................. Programmable Digit height ................................................................ 13.8 mm Display updating ...................................................... 2.2 times / s Input frequency outside range and NAMUR input sensor error is indicated by .... Explanatory text Current output (5725D): Programmable signal ranges ............................... 0...20, 4...20 & 20...0, 20...4 mA Load (max.) ................................................................. 20 mA / 800 Ω / 16 VDC Current limit ............................................................... ≤ 28 mA Load stability ............................................................. ≤ 0.01% of span / 100 Ω Programmable response time ............................. 0.1...60.0 s Sensor error indication, at NAMUR input: selectable ............................................................ 0 / 3.5 / 23 mA / none Output limitation at outside range: on 4...20 and 20...4 mA signals .................. 3.8...20.5 mA on 0...20 and 20...0 mA signals .................. 0...20.5 mA Relay outputs (5725D): Relay function ........................................................... Setpoint Hysteresis, in % / display counts ...................... 0...100% / 0...9999 On and Off delay ...................................................... 0...3600 s Power On delay ........................................................ 0.0...60.0 s Sensor error action .................................................. Make / Break / Hold Max. voltage .............................................................. 250 VRMS Max. current ............................................................... 2 A / AC Max. AC power .......................................................... 500 VA Max. current at 24 VDC ......................................... 1 A Marine: Det Norske Veritas, Ships & Offshore ............. Stand. f. Certific. No. 2.4 Approvals: EMC 2014/30/EU ..................................................... EN 61326-1 LVD 2014/35/EU ..................................................... EN 61010-1 UL, Standard for Safety ......................................... UL 508 EAC TR-CU 020/2011 ............................................ EN 61326-1

Input ”out of range” indication Valid measurement range: Out of range limit Display readout f to I function: 0.001 Hz to 50 kHz < 0.0009 Hz (18 min. 31 sec.) or 0.5 Hz (2.0 s) if L.COF=YES (Low cut-off frequency) If In.Lo is set to 0.000 Hz: ”0.0” If In.Lo is set ≥ 0.001 Hz: ”IN.LO” - flashing > 50.5 kHz ”IN.HI” - flashing Period time function: 20 µs to 999.9 s > 1111 s (18 min. 31 sec.) (Low cut off time) ”IN.HI” - flashing < 19.8 µs ”IN.LO” - flashing Sensor error indication in 5725, only available for NAMUR input: Condition Out of range limit Relay behaviour Analog output value Display redaout Sensor input type = NAMUR and sensor error detection = ON > 6.9 mA Set to user defined value: HOLD. ACTIVE. DEACTIVE or NONE Set to user- defined value (23, 0, 3.5 mA or NONE) ”SE.SH” < 0.1 mA ”SE.BR”

Display out of range Indication Valid display value range: Out of range limit Display readout -1999 to 9999 < -1999 ”-1.9.9.9.” - flashing > 9999 ”9.9.9.9.” - flashing Hardware error indication Error explanation Error cause Display readout Error in internal communication (SPI etc.) Permanent error in intercommu- nication between microcon- trollers ”HW.ER” - flashing Error in checksum test of the con- figuration in RAM Error in RAM ”RA.ER”- flashing Error in checksum test of the con- figuration in EEPROM Error in EEPROM ”EE.ER”- flashing Error in OK check or checksum test of the calibration data in FLASH Error in FLASH or Calibration has not been per- formed or Calibration data in FLASH are corrupt ”NO.CA”- flashing

41 42 43 44 45 46 41 42 43 44 45 46 41 42 43 44 45 46 41 42 43 44 45 46 41 42 43 44 45 46 41 42 43 44 45 46 41 42 43 44 45 46 mA 11 12 R2 R1 21 22 23 24 25 26 S0 - + ∼ 41 42 43 44 45 46 TTL TTL + + + 5725V102-UK 15 Special current Special voltage Tacho S0 NAMUR PNP NPN Contact (NPN) Current Inputs: Output: Supply: Relays CONNECTIONS + supply + supply 5-17 V + supply 5-17 V + supply 8.3 V + supply 17 V + supply 5-17 V + supply 5-17 V + supply

1 2 3 4 44 46 45 43 42 41 R1 R2 mA VREG 5...17 V 16 5725V102-UK BLOCK DIAGRAM I Output Common Relay 1 N.O. Relay 1 N.C. Common Relay 2 N.O. Relay 2 N.C. Supply Supply 21.6...253 VAC or 19.2...300 VDC Option D Gnd. Option D fin Freq. detector

THE FUNCTION KEYS Documentation for the routing diagram In general When configuring the display you are guided through all parameters, allowing you to choose the settings which fit the application. For each menu there is a scrolling help text which is automatically shown in the display if no key has been activated for appr. 5 seconds. Configuration is carried out by way of the 3 function keys 1 2 and 3. 1 will increase the numerical value or choose the next parameter. 2 will decrease the numerical value or choose the previous parameter. 3 will accept the chosen value and go to the next menu. If a function does not exist in the hardware, all parametres belonging to that function will be skipped in order to make configuration as simple as possible. The configuration will not be saved until the end of the menu structure when the display shows - - - -. Pressing and holding 3 will return to the previous menu or go back to the default state (”Monitor”) without saving the changed values or parameters. If no key is activated for 2 minutes, the display will return to the default state (”Monitor”) without saving the changed values or parameters. Further explanations Fast setpoint adjustment and relay test (only 5725D) These menus are interactive and allow you to adjust the setpoints while the display is measuring the input signal. The front LEDs will then indicate when the relays change state, thus easing the setpoint adjustment in many situations. By activating 1 and 2 simultaneously, a relay test will be initiated and the relay will change state. The setpoint adjustment will be saved by a quick press of 3 . Holding down 3 for more that 0.5 seconds will return the display to the default state (”Monitor”) without changing the setpoint.

Default password 2008 allows access to all configuration menus. 5725D only: There are two levels of password protection. Passwords be tween 0000 and 4999 allow access to the fast setpoint adjustment and relay test menus (using this password blocks access to all other parts of the menu). Passwords between 5000 and 9999 block access to all parts of the menu, fast setpoint and relay test (current setpoint is still shown). Additional 5725 features (from s/n > 121435001) Out of range indication at f/I function Out of range min. limit is < 0.0009 Hz / (18 min. 31 sec.). - if the In.Lo value is set to ”0.0” Hz the display readout will be ”0.0” when the ”out of range” min. limit is reached. - if the In.Lo value is set different from ”0.0” Hz the display readout will be ”In.Lo” - flashing - when the ”out of range” min. limit is reached. Low cut-off filter The 5725 frequency indicator has a selectable low cut-off filter, which sets the display and output to 0% when the measured frequency is ≤ 0.5 Hz (2 s). This filter allows the display to ignore extremely low frequencies from flowmeters and encoders which are sometimes present when the process is at idle. Faster analog output The analog output response time can be adjusted to a fast 0.1 second, allowing the analog output to track faster changing input signals.

(E.PAS = YES) *1 ”Start” ”Monitor” Hold (∼3 sec.) Power up ”Start” ROUTING DIAGRAM FOR 5725A If no key is activated for 2 minutes, the display returns to default state ”Monitor” without saving configuration changes. 1 Increase value / choose next parameter 2 Decrease value / choose previous parameter 3 Accept the chosen parameter and go to the next menu Hold 3 Back to previous menu / return to default state ”Monitor” without saving.

to 1 display count above IN.LO. ”Start” ”Start” Displays either Hz/kHz or s/ms for 1 sec. before actual value is displayed. When value hits digit-limit while scrolling, either Hz/kHz or s/ms is displayed again for 1 sec. to show the user that the new range is active. *4 Only visible if password is enabled (E.PAS = YES) *1 *2 *3 *5 *6 *7 Only visible if max. (IN.LO,IN.HI) value is ≤ 50 Hz (f/I) or ≥ 20 ms (period time) Default if visible = YES, else deactivated. *10 Out of range limit is < 0.0009 Hz (18 min. 31 sec.) when L.COF = NO. Out of range limit is 0.5 Hz (2 sec.) when L.COF = YES.

� 1 Increase setpoint 2 Decrease setpoint 3 Save and exit the menu 1 and 2 simultaneously = relay changes state Same procedure for REL2! ”Start” ”Monitor” Hold (∼3sec.) Power up ”Start” ”Start” ”Start” ROUTING DIAGRAM FOR 5725D If no key is activated for 2 minutes, the display returns to default state ”Monitor” without saving configuration changes. 1 Increase value / choose next parameter 2 Decrease value / choose previous parameter 3 Accept the chosen parameter and go to the next menu Hold 3 Back to previous menu / return to default state ”Monitor” without saving. *2

is ≤ 50 Hz (f/I) or ≥ 20 ms (period time) Default if visible = YES, else deactivated. Range depends on selected display scaling. Only visible for NAMUR input. 0mA only visible for A.OUT = 0-20 or 20-0 3.5mA only visible for A.OUT = 4-20 or 20-4 Not visible if both relay functions are OFF. Minimum IN.HI value is automatically limited to 1 display count above IN.L0. ”Start” ”Start” Only visible if password is enabled (E.PAS = YES) *1 *4 Password 5000...9999: FastSet and Relay Test features disabled. (FastSet menus show the actual setpoints). *2 Displays either Hz/kHz or s/ms for 1 sec. before actual value is displayed. When value hits digit-limit while scrolling, either Hz/kHz or s/ms is displayed again for 1 sec. to show the user that the new range is active. *3 5725D only *10 Out of range limit is < 0.0009 Hz (18 min. 31 sec.) when L.COF = NO. Out of range limit is 0.5 Hz (2 sec.) when L.COF = YES.

Top line Scrolling text TEXT NR Language menu UK UK - SELECT ENGLISH HELP TEXT 0 DK DK - VAELG DANSK HJAELPETEKST 1 DE DE - WAEHLE DEUTSCHEN HILFETEXT 2 FR FR - SELECTION TEXTE D’AIDE EN FRANCAIS 3 SE SE - VALJ SVENSK HJALPTEXT 4 IT IT - SELEZIONARE TESTI DI AIUTO ITALIANI 5 ES ES - SELECCIONAR TEXTO DE AYUDA EN ESPANOL 6 CZ CZ - VYBER CESKOU NAPOVEDU 7 Error indication (when active, labels are flashing @ appr. 1 Hz) SE.BR SENSOR WIRE BREAKAGE 8 IN.HI INPUT OVERRANGE 9 SE.SH SENSOR SHORT CIRCUIT 10 IN.LO INPUT UNDERRANGE 11 9.9.9.9. DISPLAY OVERRANGE 12 -1.9.9.9. DISPLAY UNDERRANGE 13 HW.ER HARDWARE ERROR 14 EE.ER EEPROM ERROR - CHECK CONFIGURATION 15 RA.ER RAM MEMORY ERROR 16 NO.CA DEVICE NOT CALIBRATED 17 Fastset Menu F.SET REL1 FAST SET MENU - SELECT RELAY 18 REL2 FAST SET MENU - SELECT RELAY 18 SETP (if fastset is enabled) xxxx RELAY SETPOINT - PRESS OK TO SAVE 19 SETP (if fastset is disabled) xxxx RELAY SETPOINT - READ ONLY 20 Configuration setup PASS xxxx SET CORRECT PASSWORD 21 IN PNP PNP SENSOR INPUT 22 NPN NPN SENSOR INPUT 23 TTL TTL SENSOR INPUT 24 NAMU NAMUR SENSOR INPUT 25 S0 S0 SENSOR INPUT 26 TACH TACHO SENSOR INPUT 27 XmA SPECIAL CURRENT SENSOR INPUT 28 XV SPECIAL VOLTAGE SENSOR INPUT 29 TR.LO (when special voltage input is selected) xxxx SET LOW TRIGGER LEVEL IN VOLT 30 TR.LO (when special current input is selected) xxxx SET LOW TRIGGER LEVEL IN mA 31 TR.HI (when special voltage input is selected) xxxx SET HIGH TRIGGER LEVEL IN VOLT 32 TR.HI (when special current input is selected) xxxx SET HIGH TRIGGER LEVEL IN mA 33 Z.IN (when special voltage input is selected) HI.Z SET INPUT RESISTANCE HIGH 34 PL.UP SET INPUT PULL UP 35 PL.DN SET INPUT PULL DOWN 36 S.SUP (not when NAMUR or S0 input is selected) xxxx SET SENSOR SUPPLY VOLTAGE 37 IN.UN HZ SET INPUT UNIT FOR FREQUENCY 38 S SET INPUT UNIT FOR PERIOD TIME 39 IN.LO xxxx SET INPUT RANGE LOW IN HZ 40 xxxx SET INPUT RANGE LOW IN KHZ 41 xxxx SET INPUT RANGE LOW IN S 42 xxxx SET INPUT RANGE LOW IN mS 43 IN.HI xxxx SET INPUT RANGE HIGH IN HZ 44 xxxx SET INPUT RANGE HIGH IN KHZ 45 xxxx SET INPUT RANGE HIGH IN S 46 xxxx SET INPUT RANGE HIGH IN mS 47 L.COF NO ENABLE LOW CUT OFF 47A YES ENABLE LOW CUT OFF 47A FILT NO ENABLE INPUT FILTER 48 YES ENABLE INPUT FILTER 48 DEC.P 1111 DECIMAL POINT POSITION 49 111.1 DECIMAL POINT POSITION 49 11.11 DECIMAL POINT POSITION 49 1.111 DECIMAL POINT POSITION 49

50 DI.HI xxxx DISPLAY READOUT HIGH 51 REL.U PERC SET RELAY IN PERCENTAGE 52 DISP SET RELAY IN DISPLAY UNITS 53 REL1 OFF RELAY 1 DISABLED 54 SETP ENTER RELAY 1 SETUP 55 SKIP SKIP RELAY 1 SETUP 56 SETP xxxx RELAY SETPOINT 57 ACT1 INCR ACTIVATE AT INCREASING SIGNAL 58 DECR ACTIVATE AT DECREASING SIGNAL 59 HYS1 xxxx RELAY HYSTERESIS 60 ERR1 HOLD HOLD RELAY AT ERROR 61 ACTI ACTIVATE RELAY AT ERROR 62 DEAC DEACTIVATE RELAY AT ERROR 63 NONE UNDEFINED STATUS AT ERROR 64 ON.DE xxxx RELAY ON-DELAY IN SECONDS 65 OF.DE xxxx RELAY OFF-DELAY IN SECONDS 66 REL2 OFF RELAY 2 DISABLED 67 SETP ENTER RELAY 2 SETUP 68 SKIP SKIP RELAY 2 SETUP 69 SETP xxxx RELAY SETPOINT 57 ACT2 INCR ACTIVATE AT INCREASING SIGNAL 58 DECR ACTIVATE AT DECREASING SIGNAL 59 HYS2 xxxx RELAY HYSTERESIS 60 ERR2 HOLD HOLD RELAY AT ERROR 61 ACTI ACTIVATE RELAY AT ERROR 62 DEAC DEACTIVATE RELAY AT ERROR 63 NONE UNDEFINED STATUS AT ERROR 64 ON.DE xxxx RELAY ON-DELAY IN SECONDS 65 OF.DE xxxx RELAY OFF-DELAY IN SECONDS 66 PO.DE xxxx RELAY POWER ON DELAY IN SECONDS 70 A.OUT 20-4 OUTPUT RANGE IN mA 71 20-0 OUTPUT RANGE IN mA 71 4-20 OUTPUT RANGE IN mA 71 0-20 OUTPUT RANGE IN mA 71 O.ERR 23mA NAMUR NE43 UPSCALE AT ERROR 72 3.5mA NAMUR NE43 DOWNSCALE AT ERROR 73 0mA DOWNSCALE AT ERROR 74 NONE UNDEFINED OUTPUT AT ERROR 75 RESP xxxx ANALOG OUTPUT RESPONSE TIME IN SECONDS 76 E.PAS NO ENABLE PASSWORD PROTECTION 77 YES ENABLE PASSWORD PROTECTION 77 N.PAS (when password enabled) xxxx SELECT NEW PASSWORD 78

Relay units Relay units Setpoint = 50 Hysteresis = 10 Setpoint = 50 Relay action: Increasing Relay action: Decreasing Hysteresis = 10

inputs and outputs for display of temperature, volume and weight, etc. Feature linearization, scaling, and difference measurement functions for programming via PReset software. Displays A wide selection of transmitters for DIN form B mounting and DIN rail devices with analog and digital bus communication ranging from application-specific to universal transmitters. Temperature Galvanic isolators for analog and digital signals as well as HART signals. A wide product range with both loop- powered and universal isolators featuring linearization, inversion, and scaling of output signals. Isolation Interfaces for analog and digital signals as well as HART signals between sensors / I/P converters / frequency signals and control systems in Ex zone 0, 1 & 2 and for some devices in zone 20, 21 & 22. Ex interfaces PC or front programmable devices with universal options for input, output and supply. This range offers a number of advanced features such as process calibration, linearization and auto-diagnosis. Universal

[email protected] Lerbakken 10 tel. +45 86 37 26 77 DK-8410 Rønde fax +45 86 37 30 85