Snell IQOTX30 Operator's Manual
Read Online
Read the Snell IQOTX30 Operator's Manual online using the built-in PDF viewer.
Key Pages of Document
IQOTX33 / IQOTX34 / IQOTX35 / IQOTX36 Fiber Optic Transmitters for 3G/HD/HD-SDI Signals Snell & Wilcox Ltd., Southleigh Park House, Eastleigh Road, Havant, Hants, PO9 2PE, United Kingdom. For General Enquiry's contact: Tel: +44 (0) 2392 489000 Fax: +44 (0)23 9245 1411 For Technical assistance contact: Tel: +44 (0) 2392 489058 Fax: +44 (0) 2392 489057 Web: http://www.snellwilcox.com/support Ftp: ftp://ftp.snellwilcox.com/suppor ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 i Contents Module Description....................................................................................................................... 1 Rear Panel Views ......................................................................................................................... 2 IQOTX30/34/36 Rear Panel View............................................................................ ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 1 Module Description The IQOTX3x modules are 1310nm or 1550nm fiber optic transmitters for 3G/HD/ SD-SDI signals. The units are available in single or dual channel versions handling up to two 3G/HD/SD-SDI sources. Single channel versions have additional flexibility with one or two optical outputs and four reclocked electrical outputs. Suitable for applications where 3G/HD-SDI signals nee ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 2 Rear Panel Views IQOTX30/34/36 Rear Panel View SDI IN SDI OUT 2 TX OUT 1 2 SDI OUT 1 IQOTX30 33-1A 2 1 SDI IN IQOTX31/33 Rear Panel View TX OUT 1 2 SDI OUT 1 IQOTX31 33-1A 2 1 SDI IN 4 3 IQOTX32/35 Rear Panel View TX OUT 1 SDI OUT 1 IQOTX32 33-1A 2 1 SDI IN 4 3 These modules can only be fitted into ‘A’ style enclosures as shown below. Enclosure order codes IQH3A-S-0, IQH3A-S-P Enclos ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 3 Order Codes IQOTX30 IQOTX3033-1A Dual Channel Single mode fiber optic transmitter for HD/SD- SDI. 2 x HD/SD-SDI inputs, 1x2, 1x1 HD/SD-SDI outputs, 1 x optical output per channel (1310nm/1310nm). IQOTX3033-1A3 Dual Channel Single mode fiber optic transmitter for 3G/HD/ SD-SDI. 2 x 3G/HD/SD-SDI inputs, 1x2, 1x1 3G/HD/SD-SDI outputs, 1 x optical output per channel (1310nm/1310nm). IQOTX30- ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 4 Feature Summary • Single mode fiber optic Transmitter for 3G/HD/SD-SDI and DVB ASI Signals • Output wavelength of 1310nm/1550nm • Active loop-through 3G/HD/SD-SDI outputs for each input in accordance with SMPTE424M, SMPTE292M, SMPTE259M and DVB ASI • Reclocking for 3 Gbit/s, 1.5 Gbit/s HD-SDI and 270 Mbit/s SDI signals, or asynchronous operation for other frequencies (input range ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 5 Technical Profile Inputs and Outputs Signal Inputs Electrical 3 GBit/s HD-SDI, 1.485 GBit/s HD-SDI or 270 Mbit/s SD-SDI (asynchronous operation available at other frequencies) Connector / Format BNC 75 ohm panel jack Conforms to SMPTE 424M (HD level A) SMPTE 292M (HD) SMPTE 259M-C (SD) Inputs Up to two Input Cable Length Up to 80m Belden 1694A @ 3 Gbit/s Up to 180m Belden 1694A @ 1.5 Gbi ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 6 Logging Input n Ident Input n Name Input n Type Input n State Input n SDI Bitrate Rx n Power State Rx n Power Tx n Laser Bias State Tx n Bias Current Tx n Power State Tx n Power Tx n Wavelength Where n is the Channel number 1or 2 RollTrack Controls On/Off, Index, Source, Address, Command, Status, Sending RollTrack Outputs Unsed Input n OK Input n None Input n Bitrate 270 Input n Bitrate ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 7 Warnings • All lasers used in this product are Class 1, in accordance with EN60825-1 as well as 21CFR 1040.10 and 1040.11 • Laser light can be damaging to the eyes. Optical fibers and uniters should be handled with great care. • The IQOTR30/31/32/33/34/35/36 is designed for use with Class 1 laser sys- tems only. Ensure that all outputs do not exceed Class 1 as doing so will impair ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 8 Connections IQOTX30/34/36 Connections Inputs SDI input to the module is via two BNC 75 ohm panel jack connectors. Optical Outputs Optical output from the module is via two SC/PC singlemode panel uniters. IQOTX30: Both optical outputs are 1310nm IQOTX34: Both optical ouputs are 1550nm IQOTX36: Optical ouput 1 is 1310nm and optical output 2 is 1550nm Electrical Outputs SDI output from the ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 9 Electrical Outputs SDI output from the module is via four BNC 75 ohm panel jack connectors. IQOTX32/35 Connections Input SDI input to the module is via a single BNC 75 ohm panel jack connector. Optical Output Optical output from the unit is via a single SC/PC singlemode panel uniter IQOTX32: 1310nm IQOTX35: 1550nm. Electrical Outputs SDI output from the module is via four BNC 75 ohm pane ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 10 Card Edge Controls IQOTX30 OK WARNING ERROR POWER OK CPU OK OK WARNING ERROR CH1 CH2 /34/36 IQOTX31 OK WARNING ERROR POWER OK CPU OK /33 IQOTX32 OK WARNING ERROR POWER OK CPU OK /35 ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 11 Attenuation The IQOTX33/34/35/36 modules have 1550nm transmission lasers, which have a higher optical power output than the 1310nm variety present on the IQOTX30/ 31/32 modules. For link distances less than 15Km, this power is suffiecient to saturate receivers. As a precaution, all units with 1550nm transmission lasers are fitted with a 5dBm attenuator. For distances greater than 15Km, ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 12 Controlling the IQOTX3x from the RollCall Control Panel Unit Status Information about the status of the unit is displayed in the Unit Status section on each RollCall Control Panel screen. The first two lines of the Unit Status display the input status, detected rate, and input selection method for Input 1. The third and fourth lines of the Unit Status display the same information for In ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 13 Input The input screen enables the type of input signal to be selected. Input 1 SDI Rate (SDI IN 1) • Auto: When selected, the unit will automatically detect and reclock any valid input signal, and the detected rate will be displayed in the Unit Status. If anything else is detected, the output will not be reclocked. If the On Input Loss / Mute option is selected, the output will be mu ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 14 • Reclock Bypass: When selected, the unit will not reclock the input signal. If a supported rate is detected, the Unit Status will display the detected rate, otherwise, *** will be displayed. If the On Input Loss / Mute option is selected, the output will be muted whenever a recoginized rate is not detected; or, if the On Input Loss / Pass option is selected, any signal standard, freq ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 15 Memory 1-16 Use the Memory function to save up to 16 setups to be recalled later. Default memory names can be changed to provide more meaningful descriptions. To save settings: • In the Save Memory column, select a memory location, and then click Save. The current settings are saved and the memory appears in the Recall Mem- ory column. To change a memory name: • In the Save Memory N ...
www.snellgroup.com IQOTX30/31/32/33/34/35/36 Page 16 Logging Information about several parameters can be made available to a logging device that is connected to the RollCall network. ...
www.snellgroup.com
IQOTX30/31/32/33/34/35/36
Page 17
Each logging screen comprises three columns:
•
Log Enable: Select the check boxes that correspond to the parameters for
which log information should be collected.
•
Log Field: Displays the name of the logging field.
•
Log Value: Displays the current log value.
RollCall Log Fields
Log Field
Log Value
SN=
www.snellgroup.com
IQOTX30/31/32/33/34/35/36
Page 18
OUTPUT_N_LASER_BIAS=
Related Devices for Snell IQOTX30:
Product instruction handbook for the Snell Basis 300 Subwoofer. The guide focuses on warranty information, replacement parts, startup procedures, usage examples.
IW-K7 IW-J7 IW-LCR7 IW-D7 IW-CR7 Owner’s Manual Instruction guide for the Snell IW-K7 Speakers. It explains operation, maintenance, and safety protocols, regulatory notices, usage procedures.
SNELL’S 3rd GENERATION IN-WALL LCR, A ZERO COMPROMISE MUSIC AND THEATER MONITOR. In 1990, Snell built the world’s first fully enclosed in-wall LCR. Like bet Operation instructions for the Snell IW-LCR7 Speakers. It offers details on component replacement, control functions, installation guides.
snellgroup.com User Instruction Manual IQQSM00 3G/HD/SD-SDI Quad Split Monitor Manual for safe operation of the Snell IQQSM0001-2A3 Control Unit. It outlines installation and installation support, error handling, firmware updates.
snellgroup.com User Instruction Manual IQGBE40 and IQGBE80 Ethernet Fiber Converter with 4/8 Port Switch Owner’s guide for the Snell IQGBE4000-1A Media Converter. The manual highlights installation procedures, functional overview, software configuration, calibration steps.
IW-S7 IW-T7 Owner’s Manual IW-S7 - T7 Manual.indd 1 IW-S7 - T7 Manual.indd 1 4/24/08 9:47:24 AM 4/24/08 9:47:24 AM Detailed user guide for the Snell IW-T7 Speakers. The guide covers usage and adjustment procedures, daily usage, startup procedures, repair references.
AMC 6030 AN IN-CEILING VERSION OF SNELL’S MOST SUCCESSFUL LCR To achieve the performance capabilities of a freestanding monitor, the flush-mount design used i Complete user documentation for the Snell AMC 6030 Speakers. This reference manual explains operational procedures, technical overview, interface navigation, maintenance.
Owner’s Manual AMC550mp Service manual for the Snell AMC550mp Amplifier. It explains warranty information, compatibility information, technical specifications.
Transmitter: Frequently Requested PDF Instructions
KRAMER ELECTRONICS LTD. USER MANUAL MODELS: KW-11T Wireless High Definition Transmitter KW-11R Wireless High Definition Receiver P/N: 2900-300194 Rev 5 Advanced user guide for the Kramer KW-11T Transmitter. This guide includes detailed instructions for operating instructions, safety protocols, control functions.
FR - Notice d’utilisation GB - Instruction FCX6 Pro Tel Radiocommande | Transmitter No. 061260 Gaz à gauche FR - Remarques générales La société Jamar Technical operations guide for the Jamara FCX6 Pro Tel Transmitter. This manual covers installation, operation, and service contacts, power management, operating conditions, calibration steps.
Motion Sensor Wireless INSTEON® Motion / Occupancy Sensor For model: 4716 Product usage guide for the SMART INSTEON Transmitter. The document guides users through usage procedures, system checks, service procedures, performance details.
Tel: 763. 571.3121 • Fax: 763. 571.0927 • www.minco.com AH440 Humidity and Temperature Transmitter Installation and Operating Instructions Technical guide for the Minco AH440 Transmitter. The manual describes troubleshooting guides, device safety checks, device instructions, control functions.