SmartAVI DVR4X4S Operation & User’s Manual

www.SmartAVI.com 1-800-AVI-2131 DVR 4X4 User Manual Display Content From Any 4 Computers On Any 4 Screens Independently Up To 20 Feet Away 4-port DVI-D Matrix Switch ...

WHAT'S IN THE BOX? 2 INTRODUCTION 3 FEATURES 3 APPLICATIONS 3 TECHNICAL SPECIFICATIONS 4 HARDWARE INSTALLATION 5 DDC LEARNING 6 FRONT PANEL CONTROL 7 ESTABLISHING AN RS-232 CONNECTION 7-8 RS-232 CONTROL WITH Smart Control Pro 8-10 LIMITED WARRANTY STATEMENT 11 Figure 2-1 PART NO. QTY DESCRIPTION DVR4X4S 1 DVI-D 4x4 Router PS5VDC4A 1 Power Adapter BRK-SKM08 - Optional, Rack mount brackets 1 Quick Start Guide WHAT’S IN THE BOX ...

placed up to 20 feet away from the attached computers or signal sources. The displays can be placed up to 20 feet away from the DVR 4X4. This results in up to 40 feet between the computers and the displays. The DVR 4X4 supports DVI-D operation at the maximum TMDS rate of 1.65 Gb/s on both the input and output signals up to 20 feet in lengt ...

Input Interface (TX) (4) DVI-D 29-pin (Female) Output Interface (RX) (4) DVI-D 29-pin (Female) Resolution Up to 1920x1200 @ 60Hz DDC 5 volts p-p (TTL) TMDS Rate 1.65Gb/s Bandwidth 380 MHz Pixel Clock 165 MHz Maximum Input Equalization Automatic Input Cable Length Up to 20 ft. Output Cable Length Up to 20 ft. CONTROL Front Panel Buttons, Select/Switch between sources and view the current selected cha ...

2. Connect the DVI video cables from the computers to the DVI-D inputs on the rear of the DVR 4X4. 3. Connect the DVI displays to the DVI-D outputs on the rear of the DVR 4X4. 4. Optionally connect a computer to the RS-232 port on the DVR 4X4 for additional remote control. 5. Power on the DVR 4X4. 6. Power on the computers and displays. If the monitors don't display correctly see DDC Learnin ...

DDC table in the display tells the computer the optimal resolution to use. In order to preserve this plug- and-play capability, we have integrated DDC learning into all of our DVI Solutions. DDC Learning Menu Connect 1 monitor only to Output 1. To access the DDC learning feature of the DVR4X4, press and hold both the Input Select and Outpu ...

During normal operation, the unit will display the status of each output with four red LED number. The number indi- cates the current INPUT or source for each OUTPUT or dis- play indicated by the green LED. Switching Between Ports To select an output press Output Select. The green LEDs will change to indicate the selected output. Then press Input Select and the LED number will change to reflect the selected input. A few seconds later ...

Establish a connection to the Smart-AVI device: 1. Connect an RS-232 cable to the RS-232 connector on the PC. 2. Connect the other end of the cable to the RS-232 port of the device. 3. Use Windows Control Panel / Device Manager to identify the Com port number. See Figure 8-1 below. 4. Power on the device. If you are using a USB to COM port adapter on a Windows PC and need to identify the COM port used, do th ...

The “Router Count” drop down selection is for users with more than 1 Smart-AVI device. Figure 9-1 Use the “Router Type” drop down to select your connected Smart-AVI device from the list. Figure 9-2 Select the COM port your computer is con- nected to your Smart-AVI device with from the “Com Port” drop down list. See the section on Establishing an RS-232 connection if you don't know which Com Po ...

After clicking the “OK” button you will see the main page. Here by selecting the File Tab you can Cre- ate and save different configura- tions and load existing configura- tions. By clicking on a square to the right of an Input and under an out- put you can switch that source to that display. You can also create and store Macros and assign names to your input ports (sources) and output ports (Display ...

A. Extent of limited warranty Smart-AVI Technologies, Inc. warrants to the end-user customers that the Smart-AVI product specified above will be free from defects in materials and workmanship for the duration of 1 year, which duration begins on the date of purchase by the customer. Customer is responsible for maintaining proof of date of purchase. Smart-AVI limited warranty covers only those defects which arise as a result of ...

ranty of any kind with regard to this material, including but not limited to, implied warranties of merchant- ability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for inci- dental or consequential damages in connection with the furnishing, performance or use of this material. No part of this docu ...