Smart Cabling & Transmission IP03PT Operation & User’s Manual

ITEM NO.: IP03P PoE Extender over Coax/Two Wire IP03P PoE Extender is designed to send and extend Ethernet network with PoE can be established using existing cables up to 600M. You can use Coax cable either any two-wire cables (UTP cable, telephone line, antenna cable, or bell wire) that is no longer in use to connect a 10/1 ...

Please note the cable quality, length and diameter of two wires used all have an influence on the transfer of data and the PoE output. CABLE Distance Power Input Data Rate PoE Output DC 12V Output Coax Cable RG59 500 PoE 54V 71.2Mbps 11.8~12.4W 1000mA DC 55.5V 71.2Mbps 12.8~13.5W 1000mA DC 48V 71.2Mbp ...

Panel View: IP03PT IP03PR LED Indicatio ...

Use SETTING button to setup a group: When IP03P need to create a group, please follow the following steps: 1. Connect IP03PR and IP03PT first then press the SETTING button 5~8 seconds of IP03PR ,the blue LED will be off, green LED will be on. 2. IP03PR Press the SETTING button 1~3 seconds then release, the RJ45 Green LED will be ...

Orange: Receive IP03PR two wire power and data transmission. ...

Please note the cable quality, length and diameter of two wires used all have an influence on the transfer of data and the PoE output. Cable Define： Data/Power + Data/Power – Caution: 1. Power output will be varied based on the power source input. IP03PR power ...