SKF KFGL Assembly Instructions Manual

for industrial applications KFG KFGS KFGL KFGL-MonoFlex KFGC 1 2 3 max max 1 2 3 max max in ax Use hard grease NLGI-2 only ! Assembly instructions acc. to EC Dir. 2006/42/EC for partly completed machinery with a ...

operating instructions according to EC Machinery Directive 2006/42/EC are an integral part of the described product and must be kept for future use. These assembly instructions with associated operating instructions have been prepared in accordance with the established standards and rules f ...

Information concerning EC Declaration of Conformity and EC Declaration of Incorporation 6 Explanation of symbols and signs 7 Documentation overview 8 1. Safety instructions 8 1.1 Intended use 9 1.2 Authorized personnel 9 1.3 Electric shock hazard 10 1.4 System pressure hazard 10 1.5 Compressed air hazard 10 1.6 Hydraulic pressure ...

Operating instructions table of contents 1. Safety instructions 52 1.1 General information 52 1.2 Disclaimer of liability 52 2. Lubricants 52 3. Transport, delivery, and storage 53 3.1 Lubrication units 53 3.2 Electronic and electrical devices 53 3.3 General notes 53 4. Assembly 54 4.1 Information on assembly 54 4.2 Assembly proce ...

KFG KFGS KFGL KFGC 10. KFGL control unit 83 10.1 Display and control elements of control screen 83 10.2 Display and control menu 85 10.2.1 Main menu 85 10.2.2 Info - Information mode 86 � 10.2.3� Config.�-�Configuration�mode� 88 10.3 Programming a KFGL pump unit 90 11. KFGC control unit 91 11.1 KFGC series (CAN bus) 91 ...

KFG, KFGS, KFGL, KFGC is hereby confirmed to comply with the essen- tial protection requirements stipulated by the Directive(s) of the Council on the approximati- on of laws of the Member States concerning: Machinery Directive 2006 2006/42/EG Electromagnetic Compatibility 2014/30/EU Low Voltage Devic ...

and their significance Hazard symbols Explanation of symbols Explanation of symbols and signs You�will�find�these�symbols,�which�warn�of� specific�dangers�to�persons,�material�assets,�or� the environment, next to all safety instructions in these operating i ...

ProFlex progressive centralized lubrication systems 951-180-005-EN LC502 control unit for MonoFlex single-line lubrication systems 951-180-004-EN KFG; KFGS; KFGC (CAN bus) for industrial use 951-170-203-EN CAN bus control system description 951-130-502-EN Page 8 EN Assembly instructions The operator of the ...

KFGC series are used to supply centralized lub- rication systems in vehicles, systems and ma- chines. They deliver oils and greases (up to NLGI Grade 2). The use of synthetic oils requires prior approval from SKF Lubrication Systems Germany GmbH. Any other usage is deemed non-compliant with t ...

The described product is pressurized during operation. The product must therefore be depressurized before st- arting assembly, maintenance or repair work,�or�any�system�modifications�or� system repairs. Depending on the model design, the product may be able to be operated hydraulically. Assembly instructio ...