Trotec BB30 Operating Manual
Text of Trotec BB30 Operating Manual
Trotec BB30 Operating manual – layer thickness measuring device BB30
Table of contents
Notes regarding the operating manual................................. 1
Safety..................................................................................... 1
Information about the device................................................ 2
Transport and storage........................................................... 4
Operation ....................................
Operating manual – layer thickness measuring device BB30 Improper use
Do not use the device in potentially explosive atmospheres, for
measurements in liquids or at live parts. Trotec accepts no
liability for damages resulting from improper use. In such a
case, any warranty claims will be voided. Any unauthorised
modifications, alterations or structural changes to the device are
forbidden.
Personnel qualifications
People who use this device must:
•
Operating manual – layer thickness measuring device BB30 Device depiction
BB30
1
3
2
7
4
8
5
6
No. Designation
1
Display
2
Cross control with the buttons for up, down, right and left
3
Detachable measuring head
4
Sensor
5
Battery compartment with cover
6
Extension cable, device connection
7
Extension cable, measuring head connection
8
Power button
Display
Group3
8.2
(0)
um
DEL
NFE
9
13
11
14
16
15
10
12
17
No.
Designation
9
Measurement value indicat
Operating manual – layer thickness measuring device BB30 Technical data
Parameter
Value
Model
BB30
Sensor
F
N
Material
Ferromagnetic
ground
Non-ferrous metal
ground
Measuring principle
Magnetic induction Turbulent flow
Measuring range
0 to 2000 μm
0 to 78.7 mils
0 to 2000 μm
0 to 78.7 mils
Guaranteed tolerance
(of the measured
value)
0 to 1000 μm
(±2 % ±2 μm)
1000 to 2000 μm
(±3.5 %)
0 to 39.3 mils
(±2 % ±0.08 mils)
39.3 to 78.7 m
Operating manual – layer thickness measuring device BB30 Operation
Inserting the batteries
•
Insert the supplied batteries before first use.
Notice
Make sure that the surface of the device is dry and the
device is switched off.
5
1.
Push down the clip at the battery cover (5) and remove the
cover.
2.
If applicable, remove old batteries from the battery
compartment.
3.
Insert the new batteries in the battery compartment with
correct polarity.
4.
P
Operating manual – layer thickness measuring device BB30 Device calibration
Carry out a zero point calibration before each measuring
operation.
You can perform the calibration e.g. at an untreated or uncoated
spot of the object to be tested or use the set included in the
scope of delivery.
Info
Please bear in mind that the device at hand is a
precision measuring device that can determine coating
thicknesses of no more than a few micrometres (1 µm
Operating manual – layer thickness measuring device BB30 Adjusting the storage settings for the measured values
•
The measured values are stored in groups.
•
The measured values can be saved in the groups from
1 to 50.
•
If you have selected Group (0), individually measured
values will only be displayed, but not saved.
•
In each group up to 50 measured values can be stored.
•
The groups can be selected in the start screen or else via
the
Operating manual – layer thickness measuring device BB30 Setting the background illumination
1.
Press the Left button (2) to call up the main menu.
2.
Use the Up or Down button (2) to select the menu item Set.
3.
Confirm your selection by pressing the Left button (2).
ð The submenu Set will be displayed.
4.
Use the Up or Down button (2) to select the menu item
Backlight.
5.
Confirm your selection by pressing the Left button (2).
ð A scale wit
Operating manual – layer thickness measuring device BB30 Accessing device information
1.
Press the Left button (2) to call up the main menu.
2.
Use the Up or Down button (2) to select the menu item Set.
3.
Confirm your selection by pressing the Left button (2).
ð The submenu Set will be displayed.
4.
Use the Up or Down button (2) to select the menu item
Info.
5.
Confirm your selection by pressing the Left button (2).
ð The submenu Info will b
Operating manual – layer thickness measuring device BB30 PC software
Using the software Coating Thickness Tester stored
measurement data can be called up and saved via a Bluetooth
interface.
The software is available for download at www.trotec.de.
Info
The supplied free software is designed for useful basic
functionalities. Trotec assumes no liability with regard
to this free software and also provides no support on
that score. Trotec accepts no
Operating manual – layer thickness measuring device BB30 PC software overview
18
20
19
24
21
25
22
23
No.
Designation
Meaning
18
Group selection
Selecting groups for reading
19
Read button
Reading the selected groups
20
Get device address button
Displaying address details for the device connection
21
Indication of the statistics
Further information on the selected measurement series
22
Data filtering selection
Selecting a group for displaying measu
Operating manual – layer thickness measuring device BB30 Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
The device does not switch on:
•
Check the charging status of the batteries. Change the
batteries, if required (see chapter Inserting the batteries).
•
Check that the batteries are properly positioned. Ch
Trotec BB30 Trotec GmbH & Co. KG
Grebbener Str. 7
D-52525 Heinsberg
+49 2452 962-400
+49 2452 962-200
[email protected]
www.trotec.com