DOTWORKZ D2 COOLDOME Operation & User’s Manual

INSTALLATION GUIDE D2 COOLDOME™ ENCLOSURE Product Models: D2-CD-12V D2-CD-24V ...

Limited Warranty Info ..………………………………………………………………………………………………………………………………………………………………………………... 0 Product Installation Precautions, Warnings, and Installation Guidelines ......................................... ...

DOTWORKZ SYSTEMS INC. Warrants this Product to be free from defects in material or workmanship, as follows: PRODUCT CATEGORY PARTS LABOR All Enclosures and Electronics One (1) Year One (1) Year Power Supplies One (1) Year One (1) Year Accessory Brackets One (1) Year One (1) Year During the warranty period, to repai ...

(RETAIN THIS DOCUMENT) IMPORTANT SAFEGUARDS 1 Read Instructions - All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions -The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings ...

2) Please use only approved watertight electrical conduit and connectors, IP66 or better, with proper seals and fittings installed & fully seal. 3) Then, after all wire and cables are installed into enclosure, Seal wire entry ...

Prevents Humid Air exchange from venting thru electrical conduit into Dotworkz sealed enclosures, Thus eliminating condensation issues within Dotworkz sealed enclosures. QUICK INSTALLATION GUIDE VENT STOPPER PLUGS for Conduit 1) Pull wires to final installed length. 2) Open V ...

Avoid common Installation Mistakes Always Create a Drip Loop for all Cables or Conduit Entering Dotworkz D2 Housing from level or Above D2 Conduit, Power, Data, & Antennae To avoid gravity driven moisture entry into Enclosure To properly seal, Dotworkz Cable Gland Strain Relief Ports will only accept One single round ca ...

Vertical and dome-up installations are not advised, and will be prone to moisture incursion within housing, and will void warranty. Dotworkz D2 Mounting Guidelines COOLDOME™ Wiring Dotworkz D2-CD Operates using low voltage only, and creates ample curr ...

(Request BR-AXBR at time of order for listed camera models) Optional BR-AXBR Bracket Direct Compatibility: (Available by special order) Axis 231D, & 232D DVTel 9840 Merit-LiLin PIH-7000/7600/7625 PiXORD P-463T Fast Speed Dome Pelco Spectra IV Sony SNCRH124, SNC-RS44N, SNC-RS46N Toshiba IK-DP30A Compo ...

-#1 Flat Blade screw driver or smaller - 3/8 Socket wrench, nut driver, or adjustable wrench - 5/16 Socket wrench, nut driver, or adjustable wrench - 7/16 Socket wrench, nut driver, or adjustable wrench - 7/32 Socket wrench, nut driver, or adjustable wrench - 11/32 Socket wrench, nut driver, or adjustable wrench - Wire ...