Draytek Vigor2760 Operation & User’s Manual

ii Vigor2760 Series High Speed VDSL2 Router User’s Guide Version: 1.31 Firmware Version: V1.2.1.1 (for Linux platform) (For future update, please visit DrayTek web site) Date: August 15, 2014 ...

iii Copyright Information Copyright Declarations © 2014 All rights reserved. This publication contains information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. Trademarks The following trademarks are used in this document:  DrayTek is a registered trademark of DrayTe ...

iv European Community Declarations Manufacturer: DrayTek Corp. Address: No. 26, Fu Shing Road, HuKou County, HsinChu Industrial Park, Hsin-Chu, Taiwan 303 Product: Vigor2760 Series Router DrayTek Corp. declares that Vigor2760 Series of routers are in compliance with the following essential requirements and other relevant provisions of R&TTE Directive 1999/5/EEC. The product conforms to the requirements of Electro-Magnetic C ...

v TTaabbllee ooff CCoonntteennttss Introduction ..........................................................................................................1 1.1 Web Configuration Buttons Explanation ................................................................................. 2 1.2 LED Indicators and Connectors.............................................................................................. 3 1.1.1 For Vigo ...

vi 4.1.1.10 WAN Bridge....................................................................................................... 75 4.1.1.11 WAN USB.......................................................................................................... 78 4.1.1.12 WAN DSL Mode ................................................................................................ 80 4.1.2 LAN.......................................... ...

vii 4.4.3.2 Keyword Group.................................................................................................. 161 4.4.3.3 Default Keyword Object / Group........................................................................ 163 4.4.4 Schedule....................................................................................................................... 164 4.4.4.1 Schedule Object ....................... ...

viii 4.10.2.1 Disk Share ....................................................................................................... 243 4.10.2.2 General............................................................................................................ 246 4.10.3 FTP Server ................................................................................................................. 247 4.10.3.1 FTP User ............ ...

ix 5.2 Checking If the Network Connection Settings on Your Computer Is OK or Not ................. 308 5.2.1 For Windows......................................................................................................... 308 5.2.2 For Mac OS .......................................................................................................... 310 5.3 Pinging the Router from Your Computer............................. ...

1 IInnttrroodduuccttiioonn The Vigor2760 series are the routers with high speed in data transmission through DSL port and LAN ports. With the development of NGN (Next Generation Network), you may recently hear the news about FTTx deployment in your local area or even have already subscribed the unbundling last mile service (e.g. VDSL2) from local ITSP for FTTx. As adopting FTTx, the main question for end users is whether you ...

2 11..11 W Weebb C Coonnffiigguurraattiioonn B Buuttttoonnss EExxppllaannaattiioonn Several main buttons appeared on the web pages are defined as the following: Save and apply current settings. Cancel current settings and recover to the previous saved settings. Clear all the selections and parameters settings, including selection from drop-down list. All the values must be reset with factory default settings. Add new set ...

3 11..22 LLEED D IInnddiiccaattoorrss aanndd C Coonnnneeccttoorrss Before you use the Vigor router, please get acquainted with the LED indicators and connectors first. 11..11..11 FFoorr VViiggoorr22776600 LED Status Explanation Blinking The router is powered on and running normally. (ACT) Off The router is powered off. On The DSL port is connected. Blinking (Slowly) The router is ready. DSL (Green) Blinking (Quickly) T ...

4 Interface Description PWR Connector for a power adapter. I / O Power switch. Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration. VDSL/ADSL Connector for accessing the Internet. USB (1-2) ...

5 11..11..22 FFoorr VViiggoorr22776600nn LED Status Explanation Blinking The router is powered on and running normally. (Activity) Off The router is powered off. On (Green) The wireless access point is ready. Blinking (Green) The data is transmitting via wireless connection. Blinking (Orange) Blinks with one second cycle for two minutes. The WPS function is active. (Wireless LAN On/Off/WPS) Off The wireless access point is ...

6 Interface Description PWR Connector for a power adapter. I / O Power switch. Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration. WLAN ON/OFF/WPS WLAN WPS - Press this button for 2 second ...

7 11..11..33 FFoorr VViiggoorr22776600VVnn LED Status Explanation Blinking The router is powered on and running normally. (ACT) Off The router is powered off. On A PSTN phone call comes (in and out). However, when the phone call is disconnected, the LED will be off for awhile. (LINE) Off There is no PSTN phone call. On The phone connected to this port is off-hook. Off The phone connected to this port is on-hook. (Phone1/Ph ...

8 Interface Description PWR Connector for a power adapter. I / O Power switch. Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration. WLAN ON/OFF/WPS WLAN WPS - Press this button for 2 second ...

9 11..33 H Haarrddw waarree IInnssttaallllaattiioonn Before starting to configure the router, you have to connect your devices correctly. 1. Connect the xDSL interface to the external XDSL splitter with an XDSL line cable for all models. For Vigor2760Vn, also connect Line interface to external XDSL splitter. 2. Connect one port of 4-port switch to your computer with a RJ-45 cable. This device allows you to connect 4 PCs di ...

10 11..44 PPrriinntteerr IInnssttaallllaattiioonn You can install a printer onto the router for sharing printing. All the PCs connected this router can print documents via the router. The example provided here is made based on Windows 7. For installation on other Windows systems, please visit www.DrayTek.com. Before using it, please follow the steps below to configure settings for connected computers (or wireless clients). ...