feisol CT-3301 Operation & User’s Manual

User Manual ► FEISOL CT-3301, CT-3401 and CT-3402 A. Mount and Center Column Installation For exchanging mounts (flat Ball-Head mount / Center Column mount / Leveling Base) on the tripod, unscrew the three counter-sunk screws on top of the mainframe using the included Alan key (see picture), ins ...

C. Leg Extension In order to extend a leg section, turn the twist-lock approximately one half turn in counterclockwise direction. Note: If the twistlock is turned too far, the leg section may fall out and compression rings may become lost or damaged. To firmly lock a leg section into place, turn t ...

E. Ball-Head (optional) Installation When using the flat mounting plate (pre-installed on models CT-3372 and CT-3472), screw the Ball-Head into the mounting screw by turning the Ball-head clockwise until it fits snugly. Please do not over-tighten. When using a Center Column, making sure that the Ce ...

F. Spike (optional) Installation Remove the rubber caps on the end of the legs by twisting and working them forward – they fit snugly in order to prevent them from coming off accidentally. After they are removed, a thread is exposed at the tip of the leg, into which a long or short spike can be s ...