Fisher & Paykel E522BLXU Service Manual

Ice & Water Service Supplement Models: E522BLXU E522BLXFDU E522BRXU E522BRXFDU ...

notice. The latest version is indicated by the reprint date and replaces any earlier editions. ...

1.1 Display Functional Schematic .............................................................................................5 2 DISPLAY INTERFACE............................................................................................................ 6 2.1 Display Interface (Button Descriptions) .................. ...

6.2 Input / Output Status .........................................................................................................26 6.3 Fault History.......................................... ...

Ice making and water dispensing facilities are being introduced to the E522B Active Smart refrigerators. The introduction required design changes to some components and to the physical movement and/or position of other components. The functionality of the Active Smart product including downloading and diagnostics have not changed. Listed below are the changes to the E522B Active Smart with the introduction of Ice and Wa ...

REFER TO “MEASURED FILL PRODUCTS” OR “NON-MEASURED FILL PRODUCTS” FOR CORRECT INFORMATION. 2 DISPLAY INTERFACE 2.1 Display Interface (Button Descriptions) 2.1.1 Measured Fill Products - Products Produced Before January 2009 Measured Fill The MEASURED FILL key enables you to select the amount of water to be dispensed. Menu The MENU key allows you to scroll through the mai ...

2009 Menu The MENU key allows you to scroll through the main menu options (Chill, Temperature, Ice and Settings) Arrow Keys The ARROW keys are used to scroll through the settings of each function. Lock The LOCK key enables and disables the water dispenser and all the buttons. DOWN UP MENU LOCK ...

• Icemaker on/off. • Bottle chill mode – 10, 15, 20, 25, 30 minute timer with alarm. • Freezer chill mode – nominated freeze time at lower temperature set point. • Water dispensing. • Measured fill water dispensing – water dispensing volume selection with 3 set points preset. • Unit selection – Metric or US units for measured volumes. • Sabbath mode enable/disable. • K ...

Bottle Chill allows the customer to put a bottle in the freezer for a designated amount of time. When that amount of time has elapsed an alarm will sound telling the customer to take the bottle out of the FC. The Freezer automatically changes to its lowest set point. The times are 10, 15, 20, 25 and 30 minutes. To activate this mode, use the MENU key to scroll to CHILL, then use the UP key until this icon appears. Use th ...

When in this mode, the beeper does not operate when the buttons on the keypad are pressed.. Note: Faults, Bottle chill, & the door will still alarm when the refrigerator is set on key silent mode. Indicates the product is in Key Silent Mode. To activate or deactivate, hold the MENU key for four (4) seconds. 2.4.8 Dispense Lock This mode disables the water dispensing pad & prevents water from being dispensed. To ...

Bottle Chill allows the customer to put a bottle in the freezer for a designated amount of time. When that amount of time has elapsed an alarm will sound telling the customer to take the bottle out of the FC. The Freezer automatically changes to its lowest set point. The times are 10, 15, 20, 25 and 30 minutes. To activate this mode, use the MENU key to scroll to FREEZER, then use the UP key until this icon appears. Use ...

shaded. Function Key Presses Action Press Time Key Silent Mode Menu On/Off Hold down for 4 seconds. Key & Dispenser Lock Menu + Measured fill + On/Off Hold down for 2 seconds. Key Lock Menu + Measured fill + On/Off Hold down for 4 seconds. Diagnostic Mode Menu + Up + On Hold down for 4 seconds. Forced Defrost Menu + Down + On Hold down for 4 seconds. ...

Function Key Presses Action Press Time Key Silent Mode Scroll to SETTINGS On/Off Press UP or DOWN keys to turn on or off. Dispenser Lock Lock On/Off Hold down for 2 seconds. Key Lock Lock On/Off Hold down for 4 seconds. Diagnostic Mode Menu + Up + On Hold down for 4 seconds. Forced Defrost Menu + Down + On Hold down for 4 seconds. Sabbath Mode Menu + Down + Lock + + On/Off Hold down for 4 seconds. ...

key and continue pressing the key until the ICE option has been scrolled to. Press the UP and DOWN keys to turn the icemaker on or off. When the cubes are frozen, the icemaker motor will turn the ice cube tray and twist the tray causing the ice cubes to dislodge and fall out of the tray. The tray will then return to its ...

may have been in the water system. Do the same after vacations or extended periods when ice is not used. Ice cubes, when not used, will become cloudy, will shrink, and will taste stale. The ice bin will need to be emptied and cleaned periodically. Avoid contact with moving parts of the ejector mechanism. Do not place fingers o ...

measuring system, defrost system, fans or low ambient heater. (Refer diagram below.) When the PC door is opened, an alarm will sound. The number of beeps also indicates the fault code. Pressing any of the control buttons can deactivate these alarms. Example: When a fault develops, the LCD fault code appears with the spanner. After ...

Reason: The resistance of the Evaporator sensor is outside the normal range (> 45K Ohms). Primary Action: Check the sensor connection at the power module. Secondary Action: Replace the sensor. Fault Code 8 Reason: The resistance of the Evaporator sensor is outside the normal range (<660 Ohms) Primary Action: Check the sensor connection at the power module. Secondary Action: Replace the sensor. Fault Code 9 Reason: The resistance of t ...

shorted or the fan is faulty. Primary Action: Check the PC fan wiring and connections at both the fan and the power module. Secondary Action: Check the fan. If faulty, replace. Fault Code 17 Reason: The FC fan is drawing less current than is expected. Either the wiring is open circuit or the fan is faulty. Primary Action: Check the FC fan wiring and connections a ...

Reason: The resistance of the ice tray sensor is outside normal range.(< 660 Ohms). Sensor hot. Primary Action: Check the connections of the sensor at the module. Check the resistance of the sensor. Secondary Action: Replace the sensor. Fault Code 26 Reason: Icemaker motor timed out Primary Action: The icemaker gearbox is not returning to the start position and ends signal to the controller. Secondary Action: Check the gearbox, an ...

Reason: Icemaker solenoid Transistor 1 short circuit. A transistor on the controller that drives the icemaker solenoid has failed. This could be as a result of a fault in the solenoid. Primary Action: Check the solenoid resistance. If not within limits, replace the solenoid. Check the wiring and connections at the solenoid and the module. If OK, replace the control module. Fault Code 41 Reason: Icemaker solenoid Transistor 2 sho ...