ELNA Sew Fun Instruction Manual

This sewing machine is not a toy. Do not allow children to play with this machine. The machine is not intended for use by children or mentally infirm persons without supervision. This sewing machine is designed and manufactured for household use only. Read all instruction before using this sewing machine. DANGER – To reduce th ...

Name of Parts ................................................................................................................. 2 SECTION 2. GETTING READY TO SEW Extension Table ............................................................................................................... 3 Standard Accessories ........... ...

Name of Parts q Reverse stitch button w Pattern selector dial e Stitch length dial r Bobbin winder stopper t Bobbin winder spindle y Spool pins u Bobbin winder thread guide i Thread guide o Thread take-up lever !0 Thread tension dial !1 Face plate !2 Needle plate !3 Exte ...

surface and can be easily removed for free arm sewing. Detaching the table: Pull the table away from the machine. Attaching the table: Push the extension table until it snaps into the machine. SECTION 2. GETTING READY TO SEW Standard Accessories q Bobbins w Seam ripper/ Buttonhole open ...

Before connecting the power cord, make sure the voltage and frequency shown on the machine conform to your electrical power. 1. Turn off the power switch. 2. Insert the machine plug into the machine socket. 3. Insert the power supply plug into the outlet . 4. Turn on the power switch to turn on the power and sewin ...

The presser foot lifter raises and lowers your presser foot. You can raise it about 0.6 cm (1/4˝) higher than the normal up position for easy removal of the presser foot or to help you to place heavy fabric under the foot. q Normal up position w Highest position CAUTION: Turn off the power switch when changing a presser foot. w ...

Raise the needle by turning the handwheel toward you and lower the presser foot. Loosen the needle clamp screw by turning it counter- clockwise. Remove the needle from the clamp. Insert the new needle into the clamp with the flat side away from you. When inserting the needle into th ...

recess of the hook race. e Horn The spool pins are used for holding the spool of thread in order to feed thread to the machine. To use, pull up the spool pin. Push down for storage. Setting Spool Pins Removing or Inserting the Bobbin Case Open the hook cover. q Hook cover Raise the needle by tur ...

1 Pull the handwheel out. 2 Draw the thread from spool. Guide the thread around the bobbin winder thread guide. 3 Insert the thread through the hole in the bobbin from the inside to the outside. Align the notch q of bobbin to the bobbin winder spindle rib w. Put the bobbin on the bobbin winder spindle. Note: Retur ...