Digisol DG-HR3400 Quick Installation Manual

Text of the manual

The following items should be present in your package

 DG-HR3400 Wireless Broadband Home Router  Power adapter (5V DC, 1A)  Rubber feet (4 Nos.)  Quick Installation Guide  Installation Guide CD (includes User Manual, QIG & Utility)  Patch Cord (1 No.) Make sure that the package contains above items. If any of the listed items is damaged

 High Internet Access throughput.

 Wireless speed up to 300Mbps.  Allows multiple users to share a single Internet line.  Shares a single Cable or xDSL internet connection.  Access private LAN servers from the internet.  Four wired LAN ports (10/100M) and one WAN port (10/100M).  Works with IEEE 802.11b/g/n wireless LAN devices.  Su

Router is switched on and correctly powered.

On WAN port is connected. Off WAN port is not connected. WAN Blinking WAN activity (transferring or receiving data). On LAN port is connected. Off LAN port is not connected. LAN(1-4) Blinking LAN activity (transferring or receiving data). On Wireless netwo

These antennas are 5dBi dipole antennas.

Power on/off button Press this button to power on/off the router. Power The Power socket is where you will connect the power adapter. Please use the power adapter provided with this Wireless Router. LAN (1 – 4) Local Area Network (LAN) ports 1 to 4. WPS/WIFI The WPS/WIFI b

Please follow the below mentioned instructions to build the network

connection between your new WIRELESS router and your computers, network devices: 1. Connect your xDSL / cable modem to the WAN port of the router by an Ethernet cable. 2. Connect all your computers, network devices (switch / hub) to the LAN port of the router.

3. Connect the power adapter (5V DC / 1A) to the wall socket, and then

connect it to the ‘Power’ socket of the router. 4. Please check all LEDs on the front panel. Power LED ‘PWR’ should be steadily ON, WAN and LAN LEDs should be ON. Check if the computer/network device connected to the respective port of the router is powered ON and correctly conn

 Insert the Setup CD into your CD-ROM drive of notebook/desktop

computer.  Explore the CD and execute the “AutoRun.exe” file. Below given screen will appear. Click 'Start' to Continue.

 Connect one end of a network cable to the WAN port of the router and

the other end to the DSL/Cable modem. Click ‘Next’ to continue.  Connect one end of the provided network cable to one of the LAN ports (1~4) of the router and the other end to your computer. Click ‘Next’ to continue with the installation.

Other Wireless Router Manuals